SUPER MICRO Computer 7047A-73, 7047A-T user manual Preface, About This Manual, Manual Organization

Page 3

Preface

Preface

About This Manual

This manual is written for professional system integrators and PC technicians. It provides information for the installation and use of the SuperWorkstation 7047A- 73/7047A-T. Installation and maintenance should be performed by experienced technicians only.

The SuperWorkstation 7047A-73/7047A-T is a high-end system based on the SC743TQ-1200B-SQ tower/4U rackmount chassis and the X9DA7 (7047A-73) or X9DAi (7047A-T) serverboard.

Manual Organization

Chapter 1: Introduction

The first chapter provides a checklist of the main components included with the system and describes the main features of the X9DA7 and X9DAi serverboards and the SC743TQ-1200B-SQ chassis.

Chapter 2: Server Installation

This chapter describes the steps necessary to setup the SuperWorkstation 7047A- 73/7047A-T into a rack and check out the server configuration prior to powering up the system. If your system was ordered without processor and memory com- ponents, this chapter will refer you to the appropriate sections of the manual for their installation.

Chapter 3: System Interface

Refer here for details on the system interface, which includes the functions and information provided by the control panel on the chassis as well as other LEDs located throughout the system.

iii

Image 3
Contents Super Manual Revision 1.0a Release Date August 17 Preface About This ManualManual Organization System Safety Preface Table of Contents System Interface Advanced Chassis Setup Overview Chapter IntroductionPCI Expansion Slots Serverboard FeaturesProcessors Memory Onboard SAS 7047A-73 onlyChassis Features Intel C602 Chipset System Block Diagram Asia-Pacific Contacting SupermicroHeadquarters EuropePage Chapter Installation Preparing for SetupUnpacking the System Choosing a Setup Location Rack Mounting Considerations Ambient Operating TemperatureIdentifying the Sections of the Rack Rails Installing the System into a RackPreparing to Install the Chassis Rails Installing the Chassis RailsInstalling the Rails to the Chassis Installing the Rack RailsInstalling the System into a Rack Installing the System into the RackPage Control Panel Buttons PowerReset Chapter System InterfaceOverheat/Fan Fail Control Panel LEDsDrive Carrier LEDs Power FailPage Electrical Safety Precautions Chapter System SafetyGeneral Safety Precautions ESD Precautions Installing the Onboard Battery Operating PrecautionsChapter Advanced Serverboard Setup Unpacking Serverboard InstallationConnecting the Control Panel Connecting CablesConnecting Data Cables Connecting Power CablesI/O Ports Control Panel Header PinsInstalling an LGA 2011 Processor Processor and Heatsink InstallationGently push down to pop the load plate open Lever Lock Bottom View Installing a CPU HeatsinkTop View Side ViewRemoving the Heatsink Installing & Removing DIMMs Installing Memory ModulesProcessor and Memory Module Population Processors and their Corresponding Dimm SlotsRdimm Memory Support Udimm Memory Support1DPC/2DPC Lrdimm Memory SupportDimm Adding PCI Add-On Cards Installing an Add-on Card4a. X9DA7 Layout Serverboard DetailsX9DAi Jumper Description Default Setting Connector DescriptionX9DA7/X9DAi Quick Reference Description State Status Standby PWR LED Green On SB Power OnPower Button Connector DefinitionsMain ATX Power Supply Connector Processor Power ConnectorsPower On LED Overheat/Fan Fail LED OHChassis Intrusion Power LED/Speaker Fan HeadersInternal Speaker Standby Power Header Power SMB I2C ConnectorTPM Header/Port Ieee 1394a1/ 1394a2 Connectors DOM Power ConnectorSgpio Header Simbmc Slot SPDIFIn/SPDIFOut HeadersJumper Settings Explanation of JumpersCmos Clear Write Protect Enable/Disable Glan Enable/DisableWatch Dog Enable/Disable Ieee 1394a Enable/DisableManufacture Mode SMB Enable/DisableJtag Scan Onboard Indicators Onboard Power LEDLAN1/2 LEDs SAS and Sata Ports Sata PortsSAS2 Ports Installing Software SuperDoctor Supero Doctor III Interface Display Screen Remote Control Page Chapter Advanced Chassis Setup Chassis Front View Front Control Panel Overheat/Fan Fail Power FailSystem Fans Fan FailureReplacing Chassis Cooling Fans Removing a Chassis Fan Installing/Removing SAS/SATA Drives Drive Bay InstallationRemoving a SAS/SATA Drive Carrier SAS/SATA BackplaneRemoving the Empty Drive Bay Installing Components in the 5.25 Drive BaysPower Supply Failure Power SupplyPage Starting Bios Setup Utility ChapterIntroduction Main Setup How To Change the Configuration DataStarting the Setup Utility Memory Information Total Memory System Date/System TimeSMC Version SMC Build DateXBoot Features Advanced Setup ConfigurationsPower Configuration CPU ConfigurationXSocket 0 CPU Information/Socket 1 CPU Information Active Processor Cores CPU Speed64-bit Hyper-threadingDCU IP Prefetcher Hardware Prefetcher Available when supported by the CPUL1 Data Prefetch Available when supported by the CPU DCU Streamer Prefetcher Available when supported by the CPUEuP Xcpu Power Management ConfigurationPower Technology Turbo ModeShort Duration Power Limit Factory Long Duration Power LimitLong Duration Power Limit Recommended Short Duration PowerXioh Configuration XChipset Configuration XNorth BridgeXqpi Configuration QPI Link Frequency Select QPI Quick Path Interconnect Link Speed ModeCurrent Memory Mode Memory ModeDDR Speed Dram Rapl ModePerfmon and DFX Devices Mpst SupportXSouth Bridge Configuration Audio Configuration Xsata Configuration XPCIe/PCI/PnP Configuration Xscu ConfigurationAspm Support SERR# GenerationMaximum Payload Maximum Read RequestXSerial Port Console Redirection XConsole Redirection SettingsXSuper IO Configuration XSerial Port 0 ConfigurationParity Terminal TypeBits Per second Data BitsPutty Keypad Recorder ModeResolution Legacy OS RedirectionXHardware Health Configuration Fan Speed Control ModeCPU Temperature Display Mode CPU 1 Temperature/CPU 2 TemperatureXacpi Setting XTrusted Computing Available if a TPM device is installed Event Logs XChange Smbios Event Log SettingsView Smbios Event Log Erasing Settings Erase Event LogWhen Log is Full Smbios Event Log Standard Settings Log System Boot EventBoot XDelete Boot OptionNetwork Device BBS Priorities, Hard Drive BBS Priorities Administrator Password User PasswordSecurity Save Options Save Changes Save Changes and ResetSave & Exit Discard Changes and ExitBoot Override Restore DefaultsSave as User Defaults Restore User DefaultsAppendix a Bios Error Beep Codes Error MessageBeep Code/LED Page Appendix B System Specifications BiosWeight Appendix B System Specifications

7047A-73, 7047A-T specifications

The SUPER MICRO Computer 7047A-T and 7047A-73 are powerful and versatile server solutions designed to cater to a wide range of enterprise-level applications. These servers are ideal for demanding workloads, including virtualization, data analytics, and high-performance computing. They are part of the Supermicro SYS-7047A series, known for their exceptional reliability, scalability, and functionality.

One of the prominent features of the 7047A-T and 7047A-73 is their support for Intel Xeon processors. With dual-socket capabilities, these servers can accommodate up to 24 cores per CPU, providing substantial processing power for any application. The ability to use the latest Intel Xeon Scalable processors ensures that these servers can handle modern workloads efficiently and cost-effectively.

In terms of memory, the 7047A series supports up to 1TB of DDR4 RAM across 16 DIMM slots, enabling high memory bandwidth and capacity. This is particularly advantageous for memory-intensive applications such as database management systems and in-memory computing. The support for error-correcting code (ECC) memory enhances system reliability, which is crucial for enterprise environments.

The 7047A-T and 7047A-73 also feature multiple storage options, supporting up to 12 SATA drives and up to 6 NVMe drives, depending on the configuration. This flexibility allows users to customize their storage according to their specific needs, whether leveraging traditional hard drives for bulk storage or opting for SSDs for faster data access and retrieval speeds. Additionally, RAID support enhances data redundancy and performance, contributing to data integrity.

Networking is another strong suit of these servers. They come equipped with dual 10GbE LAN ports, providing high-speed connectivity to facilitate data transfer and communication between devices. This is crucial for applications that require rapid access to data across networks, such as cloud services or clustered computing environments.

Cooling efficiency has also been prioritized in the design of the 7047A series. Intelligent cooling technology helps maintain optimal operating temperatures by adjusting fan speeds based on workload demands. This not only ensures stable performance under load but also prolongs the lifespan of hardware components.

In summary, the SUPER MICRO Computer 7047A-T and 7047A-73 are robust servers designed to meet the high demands of modern enterprise applications. With powerful dual-socket Intel Xeon processors, substantial memory capacity, versatile storage options, advanced networking capabilities, and efficient cooling solutions, these servers are well-equipped to handle a variety of computing tasks, making them a compelling choice for businesses looking to enhance their IT infrastructure.