SUPER MICRO Computer 7047A-73, 7047A-T XSuper IO Configuration, XSerial Port 0 Configuration

Page 93

Chapter 7: BIOS

XSuper IO Configuration

Super IO Chip

Displays the Super IO chip type.

XSerial Port 0 Configuration

The submenus allow the user to configure the following settings for Serial Port 0:

Serial Port

Select Enabled to enable a serial port specified by the user. The options are Enabled and Disabled.

Device Settings

This feature indicates whether or not a reset is required for a serial port specified.

Change Settings

Use this feature to set the optimal Environment Control Interface (PECI) setting for a serial port specified. The default setting is Auto, which will allow the AMI BIOS to automatically select the best setting for the PECI platform.

P/S 2 Connector

This option enables the selection of keyboard or mouse for the PS/2 connector. The options are Keyboard or Mouse.

Watch Dog Function

If enabled, the Watch Dog timer will allow the system to reboot when it is inactive for more than 5 minutes. The options are Enabled and Disabled.

XSerial Port Console Redirection

COM 0

Console Redirection

Select Enabled to use a COM Port selected by the user for Console Redirection. The options are Enabled and Disabled.

XConsole Redirection Settings

This feature allows the user to specify how the host computer will exchange data with the client computer, which is the remote computer used by the user.

7-19

Page 92 Page 94
Image 93
Page 92 Page 94
Contents Super Manual Revision 1.0a Release Date August 17 Preface About This ManualManual Organization System Safety Preface Table of Contents System Interface Advanced Chassis Setup Overview Chapter IntroductionProcessors Memory Serverboard FeaturesOnboard SAS 7047A-73 only PCI Expansion SlotsChassis Features Intel C602 Chipset System Block Diagram Headquarters Contacting SupermicroEurope Asia-PacificPage Chapter Installation Preparing for SetupUnpacking the System Choosing a Setup Location Rack Mounting Considerations Ambient Operating TemperatureIdentifying the Sections of the Rack Rails Installing the System into a RackPreparing to Install the Chassis Rails Installing the Chassis RailsInstalling the Rails to the Chassis Installing the Rack RailsInstalling the System into a Rack Installing the System into the RackPage Reset PowerChapter System Interface Control Panel ButtonsOverheat/Fan Fail Control Panel LEDsDrive Carrier LEDs Power FailPage Electrical Safety Precautions Chapter System SafetyGeneral Safety Precautions ESD Precautions Installing the Onboard Battery Operating PrecautionsChapter Advanced Serverboard Setup Unpacking Serverboard InstallationConnecting Data Cables Connecting CablesConnecting Power Cables Connecting the Control PanelI/O Ports Control Panel Header PinsInstalling an LGA 2011 Processor Processor and Heatsink InstallationGently push down to pop the load plate open Lever Lock Top View Installing a CPU HeatsinkSide View Bottom ViewRemoving the Heatsink Installing & Removing DIMMs Installing Memory ModulesProcessor and Memory Module Population Processors and their Corresponding Dimm SlotsRdimm Memory Support Udimm Memory Support1DPC/2DPC Lrdimm Memory SupportDimm Adding PCI Add-On Cards Installing an Add-on Card4a. X9DA7 Layout Serverboard DetailsX9DAi Jumper Description Default Setting Connector DescriptionX9DA7/X9DAi Quick Reference Description State Status Standby PWR LED Green On SB Power OnMain ATX Power Supply Connector Connector DefinitionsProcessor Power Connectors Power ButtonPower On LED Overheat/Fan Fail LED OHChassis Intrusion Power LED/Speaker Fan HeadersInternal Speaker Standby Power Header Power SMB I2C ConnectorTPM Header/Port Ieee 1394a1/ 1394a2 Connectors DOM Power ConnectorSgpio Header Simbmc Slot SPDIFIn/SPDIFOut HeadersJumper Settings Explanation of JumpersCmos Clear Watch Dog Enable/Disable Glan Enable/DisableIeee 1394a Enable/Disable Write Protect Enable/DisableManufacture Mode SMB Enable/DisableJtag Scan Onboard Indicators Onboard Power LEDLAN1/2 LEDs SAS and Sata Ports Sata PortsSAS2 Ports Installing Software SuperDoctor Supero Doctor III Interface Display Screen Remote Control Page Chapter Advanced Chassis Setup Chassis Front View Front Control Panel Overheat/Fan Fail Power FailSystem Fans Fan FailureReplacing Chassis Cooling Fans Removing a Chassis Fan Installing/Removing SAS/SATA Drives Drive Bay InstallationRemoving a SAS/SATA Drive Carrier SAS/SATA BackplaneRemoving the Empty Drive Bay Installing Components in the 5.25 Drive BaysPower Supply Failure Power SupplyPage Starting Bios Setup Utility ChapterIntroduction Main Setup How To Change the Configuration DataStarting the Setup Utility SMC Version System Date/System TimeSMC Build Date Memory Information Total MemoryXBoot Features Advanced Setup ConfigurationsPower Configuration CPU ConfigurationXSocket 0 CPU Information/Socket 1 CPU Information 64-bit CPU SpeedHyper-threading Active Processor CoresL1 Data Prefetch Available when supported by the CPU Hardware Prefetcher Available when supported by the CPUDCU Streamer Prefetcher Available when supported by the CPU DCU IP PrefetcherPower Technology Xcpu Power Management ConfigurationTurbo Mode EuPLong Duration Power Limit Factory Long Duration Power LimitRecommended Short Duration Power Short Duration Power LimitXioh Configuration XChipset Configuration XNorth BridgeXqpi Configuration Current Memory Mode QPI Quick Path Interconnect Link Speed ModeMemory Mode QPI Link Frequency SelectPerfmon and DFX Devices Dram Rapl ModeMpst Support DDR SpeedXSouth Bridge Configuration Audio Configuration Xsata Configuration XPCIe/PCI/PnP Configuration Xscu ConfigurationMaximum Payload SERR# GenerationMaximum Read Request Aspm SupportXSuper IO Configuration XConsole Redirection SettingsXSerial Port 0 Configuration XSerial Port Console RedirectionBits Per second Terminal TypeData Bits ParityResolution Recorder ModeLegacy OS Redirection Putty KeypadCPU Temperature Display Mode Fan Speed Control ModeCPU 1 Temperature/CPU 2 Temperature XHardware Health ConfigurationXacpi Setting XTrusted Computing Available if a TPM device is installed Event Logs XChange Smbios Event Log SettingsWhen Log is Full Erasing Settings Erase Event LogSmbios Event Log Standard Settings Log System Boot Event View Smbios Event LogBoot XDelete Boot OptionNetwork Device BBS Priorities, Hard Drive BBS Priorities Administrator Password User PasswordSecurity Save & Exit Save Changes and ResetDiscard Changes and Exit Save Options Save ChangesSave as User Defaults Restore DefaultsRestore User Defaults Boot OverrideAppendix a Bios Error Beep Codes Error MessageBeep Code/LED Page Appendix B System Specifications BiosWeight Appendix B System Specifications

7047A-73, 7047A-T specifications

The SUPER MICRO Computer 7047A-T and 7047A-73 are powerful and versatile server solutions designed to cater to a wide range of enterprise-level applications. These servers are ideal for demanding workloads, including virtualization, data analytics, and high-performance computing. They are part of the Supermicro SYS-7047A series, known for their exceptional reliability, scalability, and functionality.

One of the prominent features of the 7047A-T and 7047A-73 is their support for Intel Xeon processors. With dual-socket capabilities, these servers can accommodate up to 24 cores per CPU, providing substantial processing power for any application. The ability to use the latest Intel Xeon Scalable processors ensures that these servers can handle modern workloads efficiently and cost-effectively.

In terms of memory, the 7047A series supports up to 1TB of DDR4 RAM across 16 DIMM slots, enabling high memory bandwidth and capacity. This is particularly advantageous for memory-intensive applications such as database management systems and in-memory computing. The support for error-correcting code (ECC) memory enhances system reliability, which is crucial for enterprise environments.

The 7047A-T and 7047A-73 also feature multiple storage options, supporting up to 12 SATA drives and up to 6 NVMe drives, depending on the configuration. This flexibility allows users to customize their storage according to their specific needs, whether leveraging traditional hard drives for bulk storage or opting for SSDs for faster data access and retrieval speeds. Additionally, RAID support enhances data redundancy and performance, contributing to data integrity.

Networking is another strong suit of these servers. They come equipped with dual 10GbE LAN ports, providing high-speed connectivity to facilitate data transfer and communication between devices. This is crucial for applications that require rapid access to data across networks, such as cloud services or clustered computing environments.

Cooling efficiency has also been prioritized in the design of the 7047A series. Intelligent cooling technology helps maintain optimal operating temperatures by adjusting fan speeds based on workload demands. This not only ensures stable performance under load but also prolongs the lifespan of hardware components.

In summary, the SUPER MICRO Computer 7047A-T and 7047A-73 are robust servers designed to meet the high demands of modern enterprise applications. With powerful dual-socket Intel Xeon processors, substantial memory capacity, versatile storage options, advanced networking capabilities, and efficient cooling solutions, these servers are well-equipped to handle a variety of computing tasks, making them a compelling choice for businesses looking to enhance their IT infrastructure.
Top Page Image Contents