SUPER MICRO Computer 7047A-73, 7047A-T user manual Xacpi Setting

Page 97

Chapter 7: BIOS

High - The processor is running hot. This is a 'caution' level since the CPU's 'Tem- perature Tolerance' has been reached (or has been exceeded) and may activate an overheat alarm. The system may shut down if it continues for a long period to prevent damage to the CPU. If the system buzzer and Overheat LED has activated, take action immediately by checking the system fans, chassis ventilation and room temperature to correct any problems.

System Temperature

System temperature will be displayed as detected by the BIOS.

Peripheral Temperature

Peripheral temperature will be displayed as detected by the BIOS.

Fan Speed

This feature displays the fan speed readings for all fans detected by the BIOS.

Voltage Readings

The following voltage readings will be displayed.

VTT, 1.1V, 1.5V, 5VSB, 5V, 12V, CPU1 Vcore, CPU2 Vcore, VDIMM AB, VDIMM CD, VDIMM EF, VDIMM GH, 3.3V, 3.3VSB, and VBAT.

XACPI Setting

Use this feature to configure Advanced Configuration and Power Interface (ACPI) power management settings for your system.

ACPI Sleep State

Use this feature to select the ACPI State when the system is in sleep mode. Select S1 (CPU_Stop_Clock) to erase all CPU caches and stop executing instructions. Power to the CPU(s) and RAM is maintained, but RAM is refreshed. Select Suspend Disabled to use power-reduced mode. Power will only be supplied to limited com- ponents (such as RAMs) to maintain the most critical functions of the system. The options are S1 (CPU_Stop_Clock), Suspend Disabled, and S3 (Suspend to RAM).

Numa

This feature enables the Non-Uniform Memory Access ACPI support. The options are Enabled and Disabled.

7-23

Image 97
Contents Super Manual Revision 1.0a Release Date August 17 About This Manual PrefaceManual Organization System Safety Preface Table of Contents System Interface Advanced Chassis Setup Overview Chapter IntroductionProcessors Memory Serverboard FeaturesOnboard SAS 7047A-73 only PCI Expansion SlotsChassis Features Intel C602 Chipset System Block Diagram Headquarters Contacting SupermicroEurope Asia-PacificPage Preparing for Setup Chapter InstallationUnpacking the System Choosing a Setup Location Rack Mounting Considerations Ambient Operating TemperatureIdentifying the Sections of the Rack Rails Installing the System into a RackPreparing to Install the Chassis Rails Installing the Chassis RailsInstalling the Rails to the Chassis Installing the Rack RailsInstalling the System into a Rack Installing the System into the RackPage Reset PowerChapter System Interface Control Panel ButtonsOverheat/Fan Fail Control Panel LEDsDrive Carrier LEDs Power FailPage Electrical Safety Precautions Chapter System SafetyGeneral Safety Precautions ESD Precautions Installing the Onboard Battery Operating PrecautionsChapter Advanced Serverboard Setup Unpacking Serverboard InstallationConnecting Data Cables Connecting CablesConnecting Power Cables Connecting the Control PanelI/O Ports Control Panel Header PinsInstalling an LGA 2011 Processor Processor and Heatsink InstallationGently push down to pop the load plate open Lever Lock Top View Installing a CPU HeatsinkSide View Bottom ViewRemoving the Heatsink Installing & Removing DIMMs Installing Memory ModulesProcessor and Memory Module Population Processors and their Corresponding Dimm SlotsRdimm Memory Support Udimm Memory Support1DPC/2DPC Lrdimm Memory SupportDimm Adding PCI Add-On Cards Installing an Add-on Card4a. X9DA7 Layout Serverboard DetailsX9DAi Connector Description Jumper Description Default SettingX9DA7/X9DAi Quick Reference Description State Status Standby PWR LED Green On SB Power OnMain ATX Power Supply Connector Connector DefinitionsProcessor Power Connectors Power ButtonOverheat/Fan Fail LED OH Power On LEDChassis Intrusion Fan Headers Power LED/SpeakerInternal Speaker Power SMB I2C Connector Standby Power HeaderTPM Header/Port DOM Power Connector Ieee 1394a1/ 1394a2 ConnectorsSgpio Header Simbmc Slot SPDIFIn/SPDIFOut HeadersExplanation of Jumpers Jumper SettingsCmos Clear Watch Dog Enable/Disable Glan Enable/DisableIeee 1394a Enable/Disable Write Protect Enable/DisableSMB Enable/Disable Manufacture ModeJtag Scan Onboard Power LED Onboard IndicatorsLAN1/2 LEDs Sata Ports SAS and Sata PortsSAS2 Ports Installing Software SuperDoctor Supero Doctor III Interface Display Screen Remote Control Page Chapter Advanced Chassis Setup Chassis Front View Front Control Panel Overheat/Fan Fail Power FailFan Failure System FansReplacing Chassis Cooling Fans Removing a Chassis Fan Installing/Removing SAS/SATA Drives Drive Bay InstallationRemoving a SAS/SATA Drive Carrier SAS/SATA BackplaneRemoving the Empty Drive Bay Installing Components in the 5.25 Drive BaysPower Supply Failure Power SupplyPage Chapter Starting Bios Setup UtilityIntroduction How To Change the Configuration Data Main SetupStarting the Setup Utility SMC Version System Date/System TimeSMC Build Date Memory Information Total MemoryXBoot Features Advanced Setup ConfigurationsCPU Configuration Power ConfigurationXSocket 0 CPU Information/Socket 1 CPU Information 64-bit CPU SpeedHyper-threading Active Processor CoresL1 Data Prefetch Available when supported by the CPU Hardware Prefetcher Available when supported by the CPUDCU Streamer Prefetcher Available when supported by the CPU DCU IP PrefetcherPower Technology Xcpu Power Management ConfigurationTurbo Mode EuPLong Duration Power Limit Factory Long Duration Power LimitRecommended Short Duration Power Short Duration Power LimitXioh Configuration XChipset Configuration XNorth BridgeXqpi Configuration Current Memory Mode QPI Quick Path Interconnect Link Speed ModeMemory Mode QPI Link Frequency SelectPerfmon and DFX Devices Dram Rapl ModeMpst Support DDR SpeedXSouth Bridge Configuration Audio Configuration Xsata Configuration XPCIe/PCI/PnP Configuration Xscu ConfigurationMaximum Payload SERR# GenerationMaximum Read Request Aspm SupportXSuper IO Configuration XConsole Redirection SettingsXSerial Port 0 Configuration XSerial Port Console RedirectionBits Per second Terminal TypeData Bits ParityResolution Recorder ModeLegacy OS Redirection Putty KeypadCPU Temperature Display Mode Fan Speed Control ModeCPU 1 Temperature/CPU 2 Temperature XHardware Health ConfigurationXacpi Setting XTrusted Computing Available if a TPM device is installed Event Logs XChange Smbios Event Log SettingsWhen Log is Full Erasing Settings Erase Event LogSmbios Event Log Standard Settings Log System Boot Event View Smbios Event LogXDelete Boot Option BootNetwork Device BBS Priorities, Hard Drive BBS Priorities User Password Administrator PasswordSecurity Save & Exit Save Changes and ResetDiscard Changes and Exit Save Options Save ChangesSave as User Defaults Restore DefaultsRestore User Defaults Boot OverrideError Message Appendix a Bios Error Beep CodesBeep Code/LED Page Appendix B System Specifications BiosWeight Appendix B System Specifications

7047A-73, 7047A-T specifications

The SUPER MICRO Computer 7047A-T and 7047A-73 are powerful and versatile server solutions designed to cater to a wide range of enterprise-level applications. These servers are ideal for demanding workloads, including virtualization, data analytics, and high-performance computing. They are part of the Supermicro SYS-7047A series, known for their exceptional reliability, scalability, and functionality.

One of the prominent features of the 7047A-T and 7047A-73 is their support for Intel Xeon processors. With dual-socket capabilities, these servers can accommodate up to 24 cores per CPU, providing substantial processing power for any application. The ability to use the latest Intel Xeon Scalable processors ensures that these servers can handle modern workloads efficiently and cost-effectively.

In terms of memory, the 7047A series supports up to 1TB of DDR4 RAM across 16 DIMM slots, enabling high memory bandwidth and capacity. This is particularly advantageous for memory-intensive applications such as database management systems and in-memory computing. The support for error-correcting code (ECC) memory enhances system reliability, which is crucial for enterprise environments.

The 7047A-T and 7047A-73 also feature multiple storage options, supporting up to 12 SATA drives and up to 6 NVMe drives, depending on the configuration. This flexibility allows users to customize their storage according to their specific needs, whether leveraging traditional hard drives for bulk storage or opting for SSDs for faster data access and retrieval speeds. Additionally, RAID support enhances data redundancy and performance, contributing to data integrity.

Networking is another strong suit of these servers. They come equipped with dual 10GbE LAN ports, providing high-speed connectivity to facilitate data transfer and communication between devices. This is crucial for applications that require rapid access to data across networks, such as cloud services or clustered computing environments.

Cooling efficiency has also been prioritized in the design of the 7047A series. Intelligent cooling technology helps maintain optimal operating temperatures by adjusting fan speeds based on workload demands. This not only ensures stable performance under load but also prolongs the lifespan of hardware components.

In summary, the SUPER MICRO Computer 7047A-T and 7047A-73 are robust servers designed to meet the high demands of modern enterprise applications. With powerful dual-socket Intel Xeon processors, substantial memory capacity, versatile storage options, advanced networking capabilities, and efficient cooling solutions, these servers are well-equipped to handle a variety of computing tasks, making them a compelling choice for businesses looking to enhance their IT infrastructure.