Samsung HT-Z510 manual XM Display Modes, Checking the XM Signal Strength, Checking the radio ID

XM Display Modes

The XM features described here only operate when the optional XM receiver and antenna are connected to the main unit.

Press the XM DISPLAY button.

~ Each time the XM DISPLAY button is pressed, the mode changes as follows:

CHANNEL NAME/NUMBEr ➞ CHANNEL CATEgOrY ➞

ArTIST NAME/SONg TITLE ➞ SIgNAL STrENgTH

~ When the Channel Name/Number is displayed : ~ When the Channel Category is displayed :

~ When the Artist Name/Song Title is displayed : ~ When the Signal Strength is displayed :

M ` The front panel display can indicate up to 10 alphanumeric characters at once. If the information contains more than 10 characters, the information scrolls from right to left.

`If the information contains a character that cannot be recognized by the unit, the character will be displayed with an underbar " * ".

Checking the XM Signal Strength

Press the XM DISPLAY button until <Signal> is displayed.

~ The display changes as shown below according to the receiving condition.

Display	Condition
GOOD	Signal strength is good
MARGINAL	Signal strength is marginal
WEAK	Signal strength is poor
NO	Loss of signal

Checking the radio ID

Press the Cursor , button (or [,] button on the main unit) to select channel <o>.

~ The Radio ID is displayed.

M ` To sign up for an account with the XM Satellite Radio service, an XM Satellite Radio ID number is required. Follow the procedure above to check your ID number, and then access the website at “http://activate.xmradio.com” or call “1-800-XM-RADIO(1-800-967- 2346)” with a major credit card to sign up.

ENg

● rADIO