SMC Networks SMCGS24C-Smart manual Not include multicast packets

Page 61

 

WEB CONFIGURATION

Table 5-3 Port Statistics (Continued)

 

 

Parameter

Description

 

 

Received Bytes

Total number of bytes of data received on the

 

network. This statistic can be used as a reasonable

 

indication of Ethernet utilization.

 

 

Broadcast Frames

The total number of good frames received that were

 

directed to the broadcast address. Note that this does

 

not include multicast packets.

 

 

CRC/Alignment Errors

The number of CRC/alignment errors (FCS or

 

alignment errors).

 

 

Oversize Frames

The total number of frames received that were longer

 

than 1518 octets (excluding framing bits, but

 

including FCS octets) and were otherwise well

 

formed.

 

 

Jabbers

The total number of frames received that were longer

 

than 1518 octets (excluding framing bits, but

 

including FCS octets), and had either an FCS or

 

alignment error.

 

 

64 Bytes Frames

The total number of frames (including bad packets)

 

received and transmitted that were 64 octets in length

 

(excluding framing bits but including FCS octets).

 

 

65-127 Byte Frames

The total number of frames (including bad packets)

128-255 Byte Frames

received and transmitted where the number of octets

256-511 Byte Frames

fall within the specified range (excluding framing bits

512-1023 Byte Frames

but including FCS octets).

 

1024-1518 Byte Frames

 

 

 

5-11

Image 61
Contents User Guide Page EZ Switch 10/100/1000 User Guide Page Limited Warranty Limited Warranty FCC Class a CompliancesIndustry Canada Class a Japan Vcci Class aCE Mark Declaration of Conformance for EMI and Safety EEC Power Cord Safety Safety ComplianceWarnhinweis Faseroptikanschlüsse Optische Sicherheit Power Cord Set France et Pérou uniquement ViiSchuko ViiiEnvironmental Statement Audience PurposeRelated Publications Table of Contents Making Network Connections Configuring the SwitchXii Xiii Xiv Tables Xvi FiguresFigures XviiXviii Overview Chapter AboutNetwork Management Options Switch ArchitectureDescription of Hardware Port and Power Status LEDs10/100/1000BASE-T Ports SFP Slots1000 Power Supply Socket Features and BenefitsConnectivity Performance ExpandabilityManagement Chapter Network Planning Introduction to SwitchingCollapsed Backbone Application ExamplesCentral Wiring Closet Central Wiring ClosetRemote Connections with Fiber Cable Remote Connections with Fiber CableMaking Vlan Connections Making Vlan ConnectionsApplication Notes Selecting a Site Installing the SwitchRJ-45 Connections Ethernet CablingPackage Contents Equipment ChecklistMounting Optional Rack-Mounting EquipmentRack Mounting Attaching the Brackets Attaching the Adhesive Feet Desktop or Shelf MountingInserting an SFP Transceiver into a Slot Installing an SFP TransceiverPower Socket Connecting to a Power SourceChapter Making Network Connections Connecting Network DevicesTwisted-Pair Devices Cabling GuidelinesMaking Twisted-Pair Connections Connecting to PCs, Servers, Hubs and SwitchesWiring Closet Connections Network Wiring ConnectionsFiber Optic SFP Devices Making Connections to SFP Transceivers 1000BASE-T Cable Requirements Connectivity RulesMbps Gigabit Ethernet Collision Domain Maximum 1000BASE-T Gigabit Ethernet Cable LengthMbps Ethernet Collision Domain Mbps Fast Ethernet Collision DomainCable Labeling and Connection Records Using the Web Interface Configuring the SwitchHome Navigating the Web Browser InterfaceWeb Page Configuration Buttons Configuration OptionsPanel Display Main Menu Switch Main MenuLogout Displaying Status Overview Web ConfigurationTrunk Information Switch Information Port Statistics Showing Port StatisticsParameter Description Port StatisticsNot include multicast packets Displaying System Name System Name Setting the Switch’s IP AddressField Attributes Configuring the Logon PasswordTools Restore to Factory DefaultsReset to Factory Defaults Upgrade Firmware 10 Upload/Download configuration Restart Switch Upload/Download ConfigurationStatic MAC Register ProductAdd Static MAC Static MAC Address Configuration Counter Config14 Counter Configuration 15 Port Configuration Port ConfigurationConfiguring Rate Limits 16 Rate Limiting Storm Control 17 Port Broadcast Control Port Mirroring18 Port Mirroring Cable DiagnosticTrunks Membership 19 Cable Diagnostics20 Trunk Membership Trunk ConfigurationTrunk Rate Limit 21 Trunk ConfigurationIntroduction to VLANs Vlan SettingsField Attributes Configuring the Switch QoS Disabled QOS SettingsDscp 802.1pIP Filter Security25 IP Filter Configuration Port Security 26 Port Security ACL Igmp Snoop Settings Field Attributes28 Igmp Snooping Configuration Igmp Status 29 Igmp Snoop Status Diagnosing Switch Indicators Appendix a TroubleshootingTable A-1 Troubleshooting Chart Installation Power and Cooling ProblemsIn-Band Access Twisted-Pair Cable and Pin Assignments Appendix B CablesTable B-1 10/100BASE-TX MDI and MDI-X Port Pinouts 10BASE-T/100BASE-TX Pin AssignmentsFigure B-2 Straight-through Wiring Straight-Through WiringFigure B-3 Crossover Wiring Crossover Wiring1000BASE-T Pin Assignments Cable Testing for Existing Category 5 CableTable B-2 1000BASE-T MDI and MDI-X Port Pinouts Fiber Standards Adjusting Existing Category 5 Cabling to Run 1000BASE-TPhysical Characteristics Appendix C SpecificationsManagement Features Switch FeaturesStandards WarrantyCompliances Specifications Appendix D Ordering Information Table D-1 EZ Switch 10/100/1000 Products and AccessoriesOrdering Information Glossary-1 Glossary1000BASE-T Auto-NegotiationGlossary-2 Glossary-3 Glossary-4 Glossary-5 Glossary-6 Index-1 IndexIndex-2 Index-3 Index-4 Page Technical Support