CONFIGURING THE SWITCH
Manual Configuration
Web – Click System, LAN Settings. Enter the IP address, subnet mask and gateway, then click APPLY. Note that if you change the switch IP address, you must close the web interface and start a new session using the new IP address.
Figure 5-6 LAN Settings
Configuring the Logon Password
The administrator has write access for all parameters governing the onboard agent. You should therefore assign a new administrator password as soon as possible, and store it in a safe place.
Field Attributes
• Password – Specifies the user password.
(Range:
Note: If you cannot remember the password, you can restore the original settings by following the procedure described in the “Troubleshooting” on page 61.