Appendix 1 Reset to factory default | Sierra VSP 3001 specification

8 APPENDIX

Appendix 1: Reset to factory default

In some case, we need reset the server to factory default which can operate on Setup Page. If the user can not login the Setup Page(such as forgetting the user name and the password), it will be available for resetting to factory default through ARP and PING to re-assign the IP address.

Notes: after the success of re-assigning the IP address through ARP and PING, all other settings shall be reset to factory default except IP address setting.

Assign IP address through ARP notes before operation:

Check the correct connection to the net and with the power for IP camera. Obtain a unique IP address from administrator.

MAC address: there is a unique Ethernet address for every VSP-3001IP camera(MAC address is labeled on bottom of the IP camera). The Ethernet

address is a number with 12 figures(such as 00-0c-e8-xx-xx-xx).

Fox example, the IP address for PC is 192.168.1.6, the IP address for VSP-3001IP camera will be set as 192.168.1.61, the MAC address is 00-0c-e8-xx-xx-xx.

The IP address of VSP-3001network camera must have the same IP domain with the IP address of PC(it means the same subnet mask). For example, the

IP address of PC is 192.168.1.6, the IP address of network camera is 192.168.1.61, and the subnet mask is 255.255.255.0. If the subnet mask is 255.255.255.128 or higher, the domain will not cover 192.168.1.61 and the setting will not be effective.

Operation procedure

1 IN operation system of Windows, open the DOS window and

operate as <startall programsaccessorycommand

prompt> to DOS.