Sierra VSP 3001 Connecting to Internet through HUB/Switch/Router, Access home page of IP camera

Page 8

4.3Connecting to Internet through HUB/Switch/Router

INTERNET

Users

Link Builder / Switcher

Router

Users

Reticle

Record server

For this program, not only the basic setup of PC and IP camera but also the setup of Port Forwarding function of Router is required, so the visit for network camera besides Intranet is accessible. The Router should have the function of Network Address Transition(NAT) to transit the global address to local address and assign the different external port No. to each IP camera.

4.4Access home page of IP camera

If the IP browser is Internet Explorer, the download for ActiveX is required. So,

reset the security level of the IE as low level(Tools menu > Internet Options > Security tab

>Custom level), and then enter HTTP://192.168.1.252 to the address field to open the home page of VSP-3001network camera. Click the Single Camera Screen Mode, and wait

a minute till the image appearing, then set the security level to its original level.(The PC will save the program of ActiveX after reading it, so the security level can be set to its

original level.)

If the IP browser is Netscape Navigator, please enter directly HTTP://192.168.1.252

to address field to open the home page of VSP-3001IP camera. Click the Single Camera Screen Mode, wait a minute and then the image will appear.

6

Image 8
Contents IP Camera Preface Contents System requirements FeaturesIntroduction Rear view Panel DescriptionFront view Installation Installation stepConnecting to Intranet through HUB/Switch Illustration for NET ConnectionConnecting to Internet through HUB/Switch/Router Access home page of IP cameraVideo IP Camera PagesHome Setup Page Network DNSTime Administrator General userImage settings Multi-camera screenAlarm trigger FTP transfer Transfer image in the timer mode Background recording function Recording Function Activex control recordingFTP recording Playback functionAbout I/O Example about I/OAppendix 1 Reset to factory default AppendixPage Appendix 2 Troubleshooting Appendix 3 Specification Image size