SMC Networks SMC6405TX manual Selecting a Site

Page 17

INSTALLING THE SWITCH

Selecting a Site

Be sure to follow the site selection guidelines below when choosing a location:

•Select a suitable location for the switch:

•It should be accessible for installing, cabling and maintaining the switch.

•The temperature and humidity should be within the ranges listed in the specifications.

•The status LEDs should be clearly visible.

•There should be adequate space (approximately two inches) on all sides for proper air flow.

•Make sure twisted-pair cable is always routed away from power lines, fluorescent lighting fixtures and other sources of electrical interference such as radios, transmitters, etc.

•Make sure that a properly grounded power outlet is within 8 feet (2.44 meters) of the switch and is powered from an independent circuit breaker. As with any equipment, using a filter or surge suppressor is recommended.

5

Page 16 Page 18
Image 17
Page 16 Page 18
Contents EZ Switch 10/100 Page EZ Switch 10/100 User Guide Trademarks Limited Warranty Limited Warranty FCC Class B CompliancesIndustry Canada Class B Iii Compliances Table of Contents Table of Contents Description of Hardware Features and BenefitsFront Panel LEDs Port and Switch Status LEDsRear and Bottom Panel Tracks Side-Panel RJ-45 PortsEquipment Checklist Installing the SwitchSelecting a Site Instructions Sample Application Possible Solutions TroubleshootingTwisted-Pair Cable and Pin Assignments Cable SpecificationsCables 10BASE-T/100BASE-TX Pin Assignments 100BASE-TX Connectivity GuidelinesEZ Switch 10/100 SMC6405TX SpecificationsTemperature Specifications Page Internet
Top Page Image Contents