SMC Networks SMC8516T manual Instructions

Page 17

INSTRUCTIONS

•There should be adequate space (approximately two inches) on all sides for proper air flow.

•Make sure twisted-pair cable is always routed away from power lines, fluorescent lighting fixtures and other sources of electrical interference such as radios, transmitters, etc.

•Make sure that a properly grounded power outlet is within 2.44 meters (8 feet) of the switch and is powered from an independent circuit breaker. As with any equipment, using a filter or surge suppressor is recommended.

Instructions

1.Positioning the Switch: For desktop or shelf mounting, attach the four adhesive foot pads to the bottom of the switch. For rack mounting, install into a standard EIA 19-inch rack using the included brackets.

2.Applying Power: Plug one end of the power adapter into the socket on the switch’s rear panel, and the other end into an appropriate electrical outlet. Check the Power LED to be sure power is on.

Note: It is not necessary to power off the switch before connecting or disconnecting any UTP cables, as these actions will not disrupt the operation of other devices attached to the switch.

3.Connecting PCs: Connect each PC to an RJ-45 port on the switch using Category 5 or 5e shielded or unshielded twisted-pair (UTP or STP) cable, maximum length 100 meters (328 ft). The EZ Switch 10/ 100/1000 will support up to 16 PCs. All ports on the switch support automatic MDI/MDI-X operation, so you can use straight-through cables for all network connections to PCs or servers, or to other switches or hubs.

Note: If an attached device does not support auto-negotiation, the data rate will be sensed automatically and the communication mode will default to half duplex.

5

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Page Page EZ Switch 10/100/1000 User Guide Trademarks Limited Warranty Limited Warranty EC Conformance Declaration Class a CompliancesFCC Class a Japan Vcci Class a Industry Canada Class aUnderwriters Laboratories Compliance Statement Safety ComplianceWichtige Sicherheitshinweise Germany Table of Contents Viii Introduction Features and BenefitsFront Panel LEDs Front Panel RJ-45 PortsSMC8516T Rear PanelSelecting a Site Installing the SwitchPackage Contents Instructions Installing the Switch Typical application for the SMC8516T is illustrated below Application ExampleDiagnosing Switch Indicators TroubleshootingSymptom Possible Solutions10BASE-T/100BASE-TX Pin Assignments Cable SpecificationsCables 1000BASE-T Pin Assignments Pin MDI-X Signal Name MDI Signal Name1000BASE-T Cable Requirements Cable Testing for Existing Category 5 CableAdjusting Existing Category 5 Cabling EZ Switch 10/100/1000 Product SpecificationsPower Consumption WeightPower Requirement TemperatureProduct Specifications Page For Technical SUPPORT, Call

SMC8516T specifications

SMC Networks SMC8516T is a versatile and reliable Gigabit Ethernet switch designed for small to medium-sized networks, facilitating efficient communication and data transfer. This switch boasts a stackable design and high-performance architecture, making it suitable for various applications, from home offices to larger business environments.

One of the key features of the SMC8516T is its 16 ports, all supporting auto-sensing 10/100/1000 Mbps Ethernet connections. This flexibility ensures compatibility with both legacy devices and modern high-speed applications. Each port features auto-MDI/MDI-X functionality, which eliminates the need for crossover cables, simplifying installation and reducing setup time.

The SMC8516T utilizes advanced switching technology to deliver high throughput and low latency, ensuring smooth data flow within the network. With a non-blocking architecture, this switch can handle simultaneous data transmissions across all ports without any performance degradation. This is particularly beneficial for bandwidth-intensive applications, such as video conferencing and large file transfers.

In terms of management and configuration, the SMC8516T offers a web-based interface, allowing administrators to easily monitor and manage network settings. Features such as VLAN support enable the segmentation of network traffic for improved security and performance. Additionally, the switch supports Quality of Service (QoS), which prioritizes critical network traffic, ensuring that essential applications receive the bandwidth they require.

Power over Ethernet (PoE) support is another critical aspect of the SMC8516T. This feature allows the switch to deliver both data and power over a single cable, enabling the easy deployment of powered devices such as IP cameras, VoIP phones, and wireless access points without the need for additional power sources.

The SMC8516T is built with reliability in mind, featuring a durable metal chassis designed for long-term use. Its fanless design ensures quiet operation, making it ideal for office environments. Furthermore, the switch incorporates various security features, including port security and storm control, to help protect the network from unauthorized access and ensure stable performance.

Overall, the SMC Networks SMC8516T stands out as an efficient, feature-rich Gigabit Ethernet switch that meets the demands of modern networking environments, providing the necessary performance, manageability, and flexibility to support a growing array of devices and applications. Whether for an enterprise or a smaller office setup, this switch is an excellent choice for improving network infrastructure.
Top Page Image Contents