|
| Troubleshooting Chart Continued | |
|
| ||
Problem | Correction | ||
|
|
| |
| 1. | Stop the engine. Clean the mower deck. | |
| 2. | Raise the height of cut. | |
The grass does not discharge | 3. | Replace or sharpen the blade(s). | |
correctly. | 4 | Use a slower ground speed. | |
| 5. | Move the throttle control to the FAST position. | |
| 6. | Replace the spring for the blade idler. | |
|
|
| |
The mower housing does not | 1. | Check the air pressure in the tires. | |
2. | Adjust the level of the mower deck. | ||
cut level. | |||
3. | Check the front axle. If the front axle does not freely pivot, loosen the axle bolt(s). | ||
| |||
|
|
| |
The mower blades will not | 1. | Check the mower drive belt(s). Make sure the belt(s) are installed correctly. | |
rotate. | 2. | Replace the mower drive belt(s). | |
|
|
| |
The unit will not move when | 1. | Release the automatic drive disconnect. | |
the brake is released and the | 2. | Check the motion drive belt. Make sure the belt is installed correctly. | |
speed control pedal is | 3. | Replace the motion drive belt. | |
depressed. |
|
| |
|
|
| |
The unit moves slower or | 1. | Check the motion drive belt. Make sure the belt is installed correctly. | |
2. | Replace the motion drive belt. | ||
stops when the speed control | |||
|
| ||
pedal is depressed. |
|
| |
|
|
| |
When the brake pedal is | 1. | Temporary belt noise does not change the operation of the unit. If belt noise is | |
released, belt noise can be |
| continuous, check the routing of the belt. Make sure the belt is inside all belt guides. | |
heard. |
|
| |
|
|
| |
The rear wheels spin over | 1. | Check the front axle. If the front axle does not freely pivot, loosen the axle bolt(s). | |
uneven terrain. |
|
|
English
41