Snapper Storage over 30 days, Light bulb replacement A - Bezel, B - Light bulb C - Light socket

Models: SLT23460 LT195420, CLT195420, LT23460, CLT23460, LT24520, CLT24520, SLT23460, SLT24520, CLT195420, LT23460, CLT23460, LT24520 LT195420, CLT195420,, LT23460, CLT23460, LT24520, CLT24520, SLT23460, SLT24520, CSLT23460, CSLT24520, SLT23460FC, SLT24520FC LT195420, CLT195420, LT23460, CLT23460, LT24520, CSLT24520, SLT23460, SLT24520, CSLT23460, CSLT24520, SLT23460FC, SLT24520FC LT195420, CLT195420, LT23460, CLT23460, LT24520, CLT24520, SLT23460, SLT24520, CSLT23460, CSLT24520, SLT23460FC, SLT24520FC LT195420, CLT195420,, LT23460, CLT23460, LT24520, CLT24520, SLT23460, SLT24520, CSLT23460, CSLT24520 LT195420, CLT195420, LT23460, CLT23460, LT24520, CLT24520, SLT23460, CSLT24520, SLT23460FC, SLT24520FC

1 48
Download 48 pages 43.2 Kb
Page 41
Image 41
Figure 47: Light bulb replacement

How to Replace the Light Bulb

1.Raise the tractor hood.

2.Turn the light socket until the tabs on the socket align with the notches in the bezel (Figure 46). Remove the light socket. Turn the light bulb and remove the bulb.

3.Install a new light bulb. Align the light socket with the notches in the bezel and turn the light socket to lock in position.

A

B

C

Figure 47: Light bulb replacement

A - Bezel

B - Light bulb

C - Light socket

How to Clean the Mower Deck

WARNING: Before you clean the mower deck, stop the engine and disconnect the wire to the spark plug.

Grass and other debris on top of the mower deck can keep the belt from working correctly. For safety and correct operation, frequently clean the top of the mower deck. Remove grass and debris from around the pulleys and other moving parts.

1.Move the lever for the blade rotation control to the ENGAGE position (42” models only).

2.Clean the top of the mower deck.

3.Move the lever for the blade rotation control to the DISENGAGE position (42” models only).

4.Again clean the top of the mower deck (42” models only).

5.After you cut the grass, clean the bottom of the mower deck.

Storage (over 30 days)

At the end of each year, prepare the unit for storage as follows.

The Engine

For storage information, see the the engine manufacturer’s instructions.

The Battery

1.Remove the battery.

2.Clean the battery terminals of any deposits.

3.Charge the battery. See the instructions on “How To Prepare And Charge The Battery”.

4.Store the battery in a cool, dry place.

NOTE: After a long time in storage, charge the battery.

The Fuel System

WARNING: Do not drain the gasoline inside a building or near a fire. Do not smoke because the fumes from the fuel can cause an explosion.

1.Start the engine.

2.Run the engine until the fuel tank and the carburetor are out of fuel and the engine stops.

3.After storage, make sure you use fresh fuel.

Clean the Unit

1.Clean the dirt and grass from the engine.

2.Clean the mower housing.

Lubricate the Unit

See the “Lubrication” instructions in this book.

English

39

Page 41
Image 41
Snapper specifications Storage over 30 days, Light bulb replacement A - Bezel, B - Light bulb C - Light socket