Troubleshooting
|
| Troubleshooting Chart | |
|
| ||
Problem | Correction | ||
|
|
| |
| 1. | Follow the steps, “How To Start The Engine” in this book. | |
| 2. | ||
The engine will not start. | 3. | Drain the fuel tank. Clean the fuel line. Replace the fuel filter. | |
4. | Remove the spark plug(s). Move the throttle to the SLOW position. Turn the ignition key | ||
| |||
|
| to the ON position. Try to start the engine several times. Install the spark plug. | |
| 5. | Replace the spark plug. | |
|
|
| |
| 1. | Follow the steps, “How To Start The Engine” in this book. | |
| 2. | ||
The engine will not turn over. | 3. | Replace the fuse. | |
4. | Check the wiring harness for damage or a loose connection. Repair the damaged wire. | ||
| |||
| 5. |
1.Replace the spark plug.
The engine is difficult to start. 2. Replace the fuel filter.
| 1. | Check the oil. | |
The engine does not run | 2. | Clean the air filter. | |
smooth or has a loss of | 3. | Clean the air screen. | |
power. | 4. | Replace the spark plug. | |
| 5. | Replace the fuel filter. | |
|
|
| |
| 1. | Replace the spark plug. | |
The engine does not run | 2. | Adjust the throttle control. | |
smooth at fast speed. | 3. | Clean the air filter. | |
| 4. | Replace the fuel filter. | |
|
|
| |
The engine stops when the | 1. | To activate the seat sensor, always sit in the middle of the seat. | |
blades are engaged. | 2. | Check the wiring harness for damage or a loose connection. Repair the damaged wire. | |
|
|
| |
On slopes, the engine stops. | 1. | Mow up and down slopes. Never mow across a slope. | |
2. | To activate the seat sensor, always sit in the middle of the seat. | ||
| |||
|
|
| |
| 1. | Replace the spark plug. | |
The engine will not idle. | 2. | Clean the air filter. | |
3. | Adjust the throttle control. | ||
| |||
| 4. | Drain the fuel tank. Clean the fuel line. Replace the fuel filter. | |
|
|
| |
A hot engine causes a | 1. | Clean the air screen. | |
2. | Check the oil. | ||
decrease in power. | |||
3. | Replace the fuel filter. | ||
| |||
|
|
| |
| 1. | Replace the blade. | |
Excessive vibration. | 2. | Check for loose engine bolts. | |
3. | Decrease the air pressure in the tires. | ||
| |||
| 4. | Check for a damaged belt or damaged pulley. Replace the damaged parts. |
English
40 | www.snapper.com |