COMPLIANCES
France and Peru only
This unit cannot be powered from IT† supplies. If your supplies are of IT type, this unit must be powered by 230 V (2P+T) via an isolation transformer ratio 1:1, with the secondary con- nection point labelled Neutral, connected directly to earth (ground).
†Impédance à la terre
Power Cord Set
U.S.A. and Canada | The cord set must be |
|
|
| The minimum specifications for the flexible cord are: |
| - No. 18 AWG - not longer than 2 meters, or 16 AWG. |
| - Type SV or SJ |
| - |
|
|
| The cord set must have a rated current capacity of at least 10 A. |
|
|
| The attachment plug must be an |
| (15 A, 125 V) or NEMA |
|
|
Denmark | The supply plug must comply with Section |
| or |
|
|
Switzerland | The supply plug must comply with SEV/ASE 1011. |
|
|
U.K. | The supply plug must comply with BS1363 |
| a 5 A fuse which complies with BS1362. |
|
|
| The mains cord must be <HAR> or <BASEC> marked and be of type |
| HO3VVF3GO.75 (minimum). |
|
|
Europe | The supply plug must comply with CEE7/7 (“SCHUKO”). |
|
|
| The mains cord must be <HAR> or <BASEC> marked and be of type |
| HO3VVF3GO.75 (minimum). |
|
|
| |
|
|
Veuillez lire à fond l'information de la sécurité suivante avant d'installer le RPU:
AVERTISSEMENT: L’installation et la dépose de ce groupe doivent être confiés à un personnel qualifié.
•Ne branchez pas votre appareil sur une prise secteur (alimentation électrique) lorsqu'il n'y a pas de connexion de mise à la terre (mise à la masse).
vi