SMC Networks SMCRPU14 manual Rack Mounting

Page 23

Mounting

RPU units can be mounted in a standard 19-inch equipment rack or on a desktop or shelf. Mounting instructions for each type of site follow.

Rack Mounting

Before rack mounting the unit, pay particular attention to the following factors:

•Temperature: Since the temperature within a rack assembly may be higher than the ambient room temperature, check that the rack-environment temperature is within the specified operating temperature range.

•Mechanical Loading: Do not place any equipment on top of a rack-mounted unit.

•Circuit Overloading: Be sure that the supply circuit to the rack assembly is not overloaded.

•Grounding: Rack-mounted equipment should be properly grounded. Particular attention should be given to supply connections other than direct connections to the mains.

2-3

Image 23

Contents Redundant Power Unit Page Redundant Power Unit User Guide Trademarks Limited Warranty Limited Warranty Japan Vcci Class B CompliancesFCC Class B Industry Canada Class BEC Conformance Declaration Class B Australia AS/NZS 3548 1995 Class B Power Cord Set Vii Viii Compliances Audience Environmental StatementPurpose Table of Contents Table of Contents Overview Chapter About the Redundant Power UnitFeatures and Benefits LEDs Front and Rear PanelsPort Status LEDs Page Selecting a Site Chapter Installing Redundant Power UnitInstallation Optional Rack-Mounting Equipment Equipment ChecklistPackage Contents Rack Mounting MountingAttaching the Brackets Montage Rack Mounting German Desktop or Shelf Mounting Connecting Switches to the RPUPower Receptacle Connecting the RPU in a Stack Diagnosing RPU Indicators Appendix a TroubleshootingFlashing Yellow Power and Cooling ProblemsPhysical Characteristics Appendix B. SpecificationsCompliances Safety Page RPU IndexIndex Page Internet