SMC Networks SMC7800A/VCP manual System Requirements

SYSTEM REQUIREMENTS

•Supports ITU-T VDSL/VDSL2 and ANSI T1E1.4 Part 1 VDSL interface standards, as well as other evolving ETSI, ANSI, and ITU VDSL standards for the copper local loop

•Spectral compatibility with VDSL, VDSL2, ADSL, ADSL2+, ISDN (2B1Q/4B3T), Smartphone digital PBX extensions and narrowband interference

•Robust operation on severely distorted lines

•Supports power back-off algorithm that permits a mixed distance deployment

•LEDs indicate VDSL link status, and power

•Simple plug-and-play installation

Additional VDSL2 features (CPE side) include:

•Fast startup for quick initialization

•Trellis coding modulation for higher performance

•Seamless rate adaption for enhanced quality in video applications

•Variable tone spacing enables best performance for long and short reach lines

•Improved framing, overhead channel, and interleaving

System Requirements

Before you start installing the CPE, make sure you can provide the right operating environment. See the following installation requirements:

•A PC or Macintosh with a 10/100 Mbps Ethernet adapter card installed.

•For Internet access, the computer must be configured for TCP/IP.

1-5