CONFIGURING THE ADSL ROUTER
Firmware Upgrade
Use the Firmware Upgrade screen to update the firmware or user interface to the latest versions. Download the upgrade file, and save it to your hard drive. Then click “Browse...” to look for the downloaded file. Click “BEGIN UPGRADE”. Check the Status page Information section to confirm that the upgrade process was successful.
Reset
Click “REBOOT ROUTER” to reset the ADSL Router.
If you perform a reset from this page, the configurations will not be changed back to the factory default settings.
Note: If you use the Reset button on the rear panel, the ADSL Router performs a power reset. Press the button for over five seconds, and the factory default settings will be restored.