SMC Networks AR4505GW manual Parameter Setting

Page 42

CONFIGURING THE ADSL ROUTER

Parameter Setting

Select your Country and Internet Service Provider. This will automatically configure the ADSL Router with the correct Protocol, Encapsulation and VPI/VCI settings for your ISP.

If your Country or Internet Service Provider is not listed you will need to manually enter settings. Go to “Parameter Setting - Country or ISP Not Listed” on page 4-7 in the manual.

If your ISP uses PPPoA or PPPoE, then you will need to enter the username, password and DNS Server address supplied by your ISP.

If your ISP uses 1483 Routing, then you will need to enter the IP address, Subnet Mask, Default Gateway and DNS Server address supplied by your ISP.

Note: By default 192.168.2.1 is set for the DNS Server address, this needs to be changed to reflect your ISP’s DNS Server address.

Click “NEXT” to continue.

4-4

Image 42

Contents Ozenda 11g Wireless Adsl Firewall Router Ozenda 11g Wireless Adsl Firewall Router Table of Contents Configuring the Adsl Router Iii Table of Contents Features and Benefits About the Adsl RouterWireless and Wired LAN Internet AccessApplications DMZ Host Support Shared IP AddressVirtual Server SecurityIntroduction Chapter Installation Package ContentsSystem Requirements Hardware DescriptionRear Panel LED Indicators Front PanelISP Settings Connect the SystemConnect the Adsl Line Phone Line Configuration Installing a Full-Rate ConnectionInstalling a Splitterless Connection Installing without a SplitterConnect the Power Adapter Attach to Your Network Using Ethernet CablingConfiguring Client PC TCP/IP Configuration Windows 98/Me Configuring Client PC Disable Http Proxy Internet ExplorerConfiguring Client PC Obtain IP Settings from Your Adsl Router Windows NT Windows NT Disable Http Proxy Windows NT Windows Windows Configuring Client PC Windows XP Disable Http Proxy Configuring Your Macintosh Computer Internet Explorer Uncheck all check boxes and click OK Configuring Client PC Chapter Configuring the Adsl Router Making Configuration Changes Navigating the Management InterfaceSetup Wizard Channel and SsidParameter Setting Confirm VPI/VCIParameter Description Parameter Setting Country or ISP Not Listed ISP use Bridging Parameter Setting Enter the Bridging settings provided by your ISPISP use 1483 Bridging Parameter Setting Enter the RFC1483 Bridging settings provided by your ISPISP use PPPoE Parameter Setting ISP use PPPoA Parameter Setting ISP use 1483 Routing Parameter Setting Enter the 1483 Routing settings provided by your ISPAdvanced Setup Menu DescriptionTools Time Settings SystemPassword Settings Remote Management DNS WAN ATM PVC Clone MAC Address LAN Wireless Channel and Ssid Security WEP WPA 802.1X NAS-ID NAT Address MappingVirtual Server Special Applications NAT Mapping Table Route Static RouteRIP This method provides very little security as it Routing Table Firewall Access Control Configuring the Adsl Router MAC Filter URL Blocking Schedule Rule Configuring the Adsl Router Intrusion Detection Intrusion Detection Feature Configuring the Adsl Router Stateful Packet Inspection Parameter Defaults Description Connection PolicyDoS Criteria and Port Scan Criteria HighDMZ Snmp CommunityTrap Adsl ParametersStatus Following items are included on the Adsl status Statistics Configuration Tools ToolsFirmware Upgrade ResetStatus InformationWindows NT4/2000/XP Finding the MAC address of a Network CardWindows 98/ME MacintoshAppendix a Troubleshooting Troubleshooting Troubleshooting Chart Troubleshooting Chart Symptom Action Specifications Wiring ConventionsEthernet Cable Figure B-1. RJ-45 Ethernet Connector Pin Numbers RJ-45 Port ConnectionStraight-Through Wiring Pin AssignmentsCrossover Wiring Figure B-2. RJ-11 Connector Pin Numbers Adsl CableFigure B-3. RJ-11 Pinouts ATM Features Physical Characteristics PortsAdsl Features Management FeaturesApplications Security FeaturesLAN Features Modulation TypeModulation Rate-Output Power dBm 802.11g 6Mbps 15 dBm Weight Temperature IECDimensions Input PowerStandards Conformance Electromagnetic Compatibility SafetyIeee Standards Internet StandardsSpecifications Page June 2004 Revision R01 F0.25