User Guide
In Configuration Mode, Type Icons are only used after an item to show whether it is enabled ([*]) or disabled ([ ]). If you select such an item (by pressing O K or 
), you will be able to change its status and make any other settings required by the new status. Sometimes you will have to select Yes or No from another menu screen, then return by pressing 
.
Edit Screens
The Edit Screen is used seen in the Configuration Mode.
The keypad on the remote control is used to enter text and numbers, and an icon under the text shows where the next character will be inserted.
Editing is rather like sending a text message on a mobile phone. For example, repeated presses of the ‘2’ key, will scroll through ‘2’, ‘a’, ‘b’, ‘c’, ‘A’, ‘B’ and ‘C’, so you will need to press three times to enter a ‘b’ (or six times for ‘B’). After a pause of about 1 second, the icon moves right for you to enter the next character.
Special characters can be entered by repeated presses of the ‘0’ and ‘1’ keys, as follows:
0 0 * # _ (underscore) ~
11 . , ? ! - (hyphen) & <SPACE>
The 
key moves the icon left, one character at a time, so you can go back and insert characters. If you make a mistake, use
the 
key to delete the character before the icon.
If you press 
when the icon is at the beginning of the line, this will cancel the edit, and return you to the previous screen.
When you have finished editing the line, press O K or 
, to accept the entry and move to the next screen. This is a typical Edit Screen, where the Device Name is being edited.
C h a n g e
S M C W A
C a n c e l | O K |
Other Screens
Other screens may appear sometimes, to tell you what is happening. Some examples are actions that may take a few seconds, such as saving settings, connecting to a radio station or restarting the device.
If an action is taking some time to complete, a rotating wheel icon (
Note: These displays are all temporary and are not interactive.
) will appear at the bottom of the screen.
Installing the SMCWAA-G
Essential Information and System Setup
Check the following before you start installing the
•If your wireless network uses encryption, you will need to know the WEP or WPA encryption key
•If you use a firewall, check it is correctly configured for the
8