Package Checklist, System Requirements | SMC Networks SMC2662W-AR

EZ Connect Wireless USB adapter Manual

The 11 Mbps wireless USB adapter is an easy to use, cost-effective, high-speed and secure wireless networking device for the networked SOHO environment. It allows users to share network resources and provides instant access to the internet.

Using this adapter in conjunction with SMC’s EZ Connect Wireless Access Point, you can create an instant network that integrates seamlessly with 10 Mbps Ethernet LANs. Moreover, moving or expanding your network is as easy as moving or installing additional Access Points - no wires!

English

PACKAGE CHECKLIST

The EZ Connect Wireless USB Adapter package includes:

•1 EZ Connect Wireless USB Adapter with dual dipole antenna (SMC2662W-AR)

•1 Installation CD-Rom

•1 USB cable

•This User Guide

System Requirements

Before you install the EZ Connect Wireless USB Adapter, check your system for the following requirements:

•An available USB port in your computer.

•Windows 98/Me/2000 (Have the Windows installation CD-ROM ready for use during installation).

•A minimum of 1 MB of free disk space for installing the driver and utility program.

•Another IEEE 802.11b compliant device installed in your network, such as the SMC2655W Wireless Access Point, or the SMC2662W Wireless USB Adapter.

INSTALLATION

WARNING:

•Backup your driver CD-Rom and use the copy as the working diskette to protect the original from accidental damage.

1.Select an unused USB port and remove its protective bracket.

2.Carefully insert the USB cable and press until it is firmly seated in the USB port.

3.Install the appropriate network driver for your operating system. Drivers can be found on the CD-Rom that comes with this package.

4.Install the configuration program for your wireless USB adapter. The SETUP.EXE file can be found on the CD-Rom with this package.(D:\Drivers\SMC2662W\Utility\setup.exe)

English