4.Set the "Channel" to the same radio channel as that used by the other wireless clients in your group. However, if you are connecting to a network via an access point, the adapter will automatically set the channel to be the same as that used by the Access Point.
5.For more secure data transmission, set the "Encryption" to "128-bit" or "64-bit" to ensure wireless network security. The advance Wired Equivalent Privacy (WEP) is implemented in this card to prevent unauthorized access. The 128-bit setting gives a higher level of security but the setting must be the same for all clients in your wireless network. (Default: Disabled) To completely configure WEP, you must use the Configuration Utility. Please see "Encryption Screen" under the "Configuration and Diagnostic Utility" section.
6.Set the "Fragmentation Threshold". (The Default is 2346 which means "Disabled")
7.Set the "Operating Model" to "802.11 Ad-Hoc" or "Infrastructure" depending on the type of network you want to connect to.
