Quick-Launch Icon
After the utility program is running, it will have a "Quick Launch" icon in the lower right hand corner of the task bar. Double clicking the icon in the Quick Launch bar will open the EZ Connect Wireless USB Utility program, providing quick access to all settings of the adapter. This configuration software includes the following functions:
| Monitor | Allow you to monitor network status and configure | |
|
| parameters for the wireless adapter. | |
English | Statistics | Show the statistics of the wireless adapter. | |
Site Survey | Scan/Show all the APs in range. | ||
| |||
| Encryption | Provides WEP security control. | |
| Advanced | Allow you to configure the advanced settings. | |
| Version | Show the version information. | |
|
Monitor Screen
When you start the wireless USB utility, the information window for the
Click "Modify" to configure "Operating Model", "Channel", "SSIDl" and "Tx Rate". After configuration, just click "Apply" to save the changes.
Operating Mode Set the station operation mode to io802.11 AdHocl1 for network configurations that do not have any Access Points, or to "Infrastructure" for configurations with Access Points. ("Infrastructure" is the default setting)
Channel | If you are setting up an ad hoc wireless LAN, set |
| the channel number to the same radio channel as |
| that used by the other wireless clients in your |
| group. However, if you are connecting to a |
| network via an Access Point, then the channel is |
| automatically set to the channel of the Access |
| Point that the adapter connects to. |
SSID | Input an SSID string that you want to connect to |
| ("ANY" is the default setting). If you will be |
| roaming among multiple Access Points with |
| different BSSID’s, a value of "ANY" will allow |
| connection to any SSID. |
Tx Rate | Indicates the communication rates. Select |
| appropriate transmission speed to match your |
| wireless LAN settings. (Default: Fully Automatic) |
English
13 | 14 |