AP Mode Utility Configuration
Figure 5-2. Configuration - Security Setting
Country Region Code — Select the country region where the access point is in operation.
Table
Classification | Range |
| |
0: USA, Canada, Taiwan | CH 1 ~ CH 11 | ||
1: Europe | CH 1 | ~ CH 13 | |
2: Spain | CH 10 | ~ CH 11 | |
3: France | CH 10 | ~ CH 13 | |
4: Japan (MKK) | CH 14 |
| |
5: Japan (TELEC) | CH 1 | ~ CH 14 | |
6: ISRAEL | CH 3 | ~ CH 9 | |
7: ISRAEL | CH 5 | ~ CH 13 | |
Beacon (ms) — Set the time invterval between two beacons. (Default: 100ms)
TX Power — Set the access point transmit power. (Default: 100%)
Idle time — Set the idle time. (Default: 300s)
No forwarding among wireless clients — Check the box to prevent traffic being forwarded among the wireless clients.
Hide SSID — Check the box to hide the access point SSID.
Allow BW 40 MHz — Enable