Advanced Setup
WAN
Specify the WAN connection type provided by your Internet Service Provider, then click [More Configuration] to enter detailed configuration parameters for the selected connection type.
•[Dynamic IP]
The Host Name is optional, but it may be required by some ISPs. The default MAC address is set to the WAN's physical interface on the Barricade™. Use this address when registering for Internet service, and do not change it unless required by your ISP. If your ISP used the MAC address of an Ethernet card as an identifier when first setting up your broadband
account, connect only the PC with the registered MAC address to the Barricade™ and click the [Clone MAC Address] button. This will replace the current Barricade™ MAC address with the already registered Ethernet card MAC address.
If you are unsure of which PC did the broadband technician originally set up, call your ISP and request they register
a new MAC address for your account. Register using the Barricade™'s MAC address.
27