SMC Networks SMC7004VBR V.2 manual Configuring the Barricade, Browser Configuration

Page 18

CONFIGURING THE BARRICADE™

After you have configured TCP/IP on a client computer, use a web browser to configure the Barricade™ Broadband Router. The Barricade™ can be configured by any Java-supported browser including Internet Explorer 4.0 or above, or Netscape Navigator 4.7 or above. Using the web management interface, you may configure the Barricade™ and view statistics to monitor network activity.

Note: Before you attempt to configure your router, if you have access to the Internet please visit www.smc.com or www.smc-europe.com and download the latest firmware update.

Before you attempt to log into the Barricade™'s Web-based Administration, please verify the following:

1.Your browser is configured properly (see below).

2.Disable any firewall or security software that may be running.

3.Confirm that you have a good "link" LED where your computer is plugged into the Barricade™. If you don't have a "link" light, try another cable until you get a good link.

Browser Configuration

Confirm your browser is configured for a direct connection to the Internet using the Ethernet cable that is installed in the computer. This is configured through the options/preference section of your browser.

15

Image 18

Contents SMC7004VBR From SMCs Barricade line of Broadband Routers November Table of Contents Table of Contents Why should you do that? IntroductionFeatures and Benefits IntroductionPackage Contents Minimum Requirements Getting to Know the Barricade Reset LED IndicatorsResetting the Barricade Restore Factory DefaultsConnect the LAN Basic Installation ProcedurePower on Connect the WANConfiguring Your Computer Configuring Windows 95/98/MeConfiguring your Computer Configuring Windows Configuring WindowsConfiguring your Computer Configuring Windows XP Configuring Windows XPConfiguring a Macintosh Computer Configuring the Barricade Browser ConfigurationInternet Explorer 5 or above Disable Proxy ConnectionConfiguring the Barricade Netscape 4 or aboveAccessing the Barricade Management Accessing the Barricade ManagementNavigating WEB-BASED Administration Making Configuration ChangesNavigating the Web-based Administration Setup Wizard Setup WizardStep One Time Zone Step Two Broadband Type Cable ModemFixed-IP xDSL Advanced Setup Advanced SetupStep Three Finish Configuration System Time ZonePassword Settings Remote ManagementAny IP Address Single IP IP RangeWAN Dynamic IPPPPoE Pptp Static IP Address Use this section to configure the built-in client DNS LAN IP Address PoolNAT Virtual ServerSpecial Applications To setup a Parental Control Rule Click on Click here FirewallParental Control Rule Description Dhcp menu optionSchedule for Rule MAC Filtering TableWebsite Blocking Discard Ping from WAN Advanced Firewall SettingsAdvanced Firewall Protection VPN Pass-throughEmail Settings Ddns Dynamic DNSDMZ Demilitarized Zone UPnP Reset Barricade to Factory Settings Configuration Tools Backup Router SettingsRestore Router Settings ToolsFirmware Upgrade Reboot StatusSecurity Log Dhcp Client LogTroubleshooting Verify you are connected to the Barricade RouterTroubleshooting Am getting an IP Address that starts withHave another IP Address displayed Troubleshooting Have a Dynamic IP connection and I cant get online WAN Port Management and ConfigurationStandards LAN PortTechnical Specifications FCC Interference Statement Industry Canada Class BEC Conformance Declaration Class B Safety Compliance Wichtige Sicherheitshinweise Germany CompliancesIii SMCs Limited Warranty Statement Legal Information and ContactsFull Installation Manual Legal Information and ContactsCopyright TrademarksModel Number SMC7004VBR