SMC Networks SMC7004VWBR V.2 manual Configuring Your Computer in Windows 95/98/Me

Page 20

Configuring Client TCP/IP

Note: These settings may be changed to suit your network requirements, but you must first configure at least one computer as described in this chapter to access the Wireless Barricade’s Web configuration interface.See “Configuring the Wireless Barricade Router” on page 27 for information on configuring the Wireless Barricade.)

If you have not previously configured TCP/IP for your computer, refer to“Configuring Client TCP/IP” on page 13. The IP address of the connected client PC should be 192.168.2.x (where x means 2–254). You can set the IP address for client PCs either by automatically obtaining an IP address from the Wireless Barricade’s DHCP service or by manual configuration.

Configuring Your Computer in Windows 95/98/Me

You may find that the instructions here do not exactly match your version of Windows. This is because these steps and screenshots were created in Windows 98. Windows 95 and Windows Millennium Edition are very similar, but not identical, to Windows 98.

1.From the Windows desktop, click Start/Settings/Control Panel.

2.In the Control Panel, locate and double click the Network icon.

16

Image 20

Contents SMC7004VWBRV.2 Page Table of Contents Table of Contents Why should you do that? For DSL-User without a flat rate contractAbout the Wireless Barricade Router Only safe alternative Pull the plugLED Indicators Features and BenefitsAbout the Wireless Barricade Router Installing the Wireless Barricade Router Package ContentsHardware Description Hardware Description System Requirements DescriptionBasic Installation Procedure Connect the SystemPower on Connect the power adapter to the Wireless Barricade Attach to Your Network Using Radio Signals Connecting the Power Adapter InternetInstalling TCP/IP Windows 95/98/MeWindows Setting Up TCP/IP Setting Up TCP/IPConfiguring Your Computer in Windows 95/98/Me Setting Up TCP/IP Obtain IP Settings from Your Wireless Barricade Router Configuring Your Computer in Windows NT Configuring Client TCP/IP Configuring Your Computer in Windows Configuring Your Computer in Windows XP Configuring a Macintosh Computer Manual IP Configuration Page Verifying Your TCP/IP Connection Configuring Wireless Barricade Router Browser ConfigurationInternet Explorer For Macintosh Disable Proxy ConnectionInternet Explorer 5 or above Netscape 4 or above Making Configuration Changes Navigating the Web Browser InterfaceBroadband Type Setup WizardTime Zone Cable Modem Fixed-IP xDSL PPPoE xDSLPptp Point-to-Point Tunneling Protocol BigPond Advanced Setup Menu DescriptionSystem Time ZonePassword Settings WAN Remote ManagementDynamic IP Point-to-Point Over Ethernet PPPoE Point-to-Point Tunneling Protocol Pptp Static IP BigPond DNS LAN Wireless Channel and SsidEncryption Advanced Setup Network Address Translation NAT Address MappingVirtual Server Special Applications Access Control FirewallConfiguring the Wireless Barricade Router MAC Filtering Table URL Blocking Schedule Rule Configuring the Wireless Barricade Router Intrusion Detection DMZ Demilitarized Zone Ddns Dynamic DNS Settings UPnP Universal Plug and Play Setting Tools Configuration Tools ToolsTools Firmware Upgrade Tools Reset Status Section DescriptionTroubleshooting Verify your connection to the Wireless BarricadeAm getting an IP Address that starts with Have another IP Address displayed 10/100 LED does not light after a connection is made Advanced Features Indicator PanelTemperature DimensionsInput Power Internet StandardsHumidity CompliancesFCC Class B FCC Radiation Exposure StatementIndustry Canada Class B EC Conformance Declaration Class BLegal Information Contacts Legal Information and Contacts Statement of Conditions Limitation of Liability