SMC Networks SMC7004VWBR V.2 manual 10/100 LED does not light after a connection is made

Page 74

Troubleshooting

D. The 10/100 LED does not light after a connection is made.

1.Check that the host computer and hub are both powered on.

2.Be sure the network cable is connected to both devices.

3.Verify that Category 5 cable is used if you are operating at 100 Mbps, and that the length of any cable does not exceed 100 m (328 ft).

4.Check the network card connections.

5.The 10BASE-T/100BASE-TX hub/switch port, network card, or cable may be defective.

70

Image 74

Contents SMC7004VWBRV.2 Page Table of Contents Table of Contents Why should you do that? For DSL-User without a flat rate contractAbout the Wireless Barricade Router Only safe alternative Pull the plugLED Indicators Features and BenefitsAbout the Wireless Barricade Router Installing the Wireless Barricade Router Package ContentsHardware Description Hardware Description System Requirements DescriptionBasic Installation Procedure Connect the SystemPower on Connect the power adapter to the Wireless Barricade Attach to Your Network Using Radio Signals Connecting the Power Adapter InternetInstalling TCP/IP Windows 95/98/MeWindows Setting Up TCP/IP Setting Up TCP/IPConfiguring Your Computer in Windows 95/98/Me Setting Up TCP/IP Obtain IP Settings from Your Wireless Barricade Router Configuring Your Computer in Windows NT Configuring Client TCP/IP Configuring Your Computer in Windows Configuring Your Computer in Windows XP Configuring a Macintosh Computer Manual IP Configuration Page Verifying Your TCP/IP Connection Configuring Wireless Barricade Router Browser ConfigurationInternet Explorer For Macintosh Disable Proxy ConnectionInternet Explorer 5 or above Netscape 4 or above Making Configuration Changes Navigating the Web Browser InterfaceBroadband Type Setup WizardTime Zone Cable Modem Fixed-IP xDSL PPPoE xDSLPptp Point-to-Point Tunneling Protocol BigPond Advanced Setup Menu DescriptionSystem Time ZonePassword Settings WAN Remote ManagementDynamic IP Point-to-Point Over Ethernet PPPoE Point-to-Point Tunneling Protocol Pptp Static IP BigPond DNS LAN Wireless Channel and SsidEncryption Advanced Setup Network Address Translation NAT Address MappingVirtual Server Special Applications Access Control FirewallConfiguring the Wireless Barricade Router MAC Filtering Table URL Blocking Schedule Rule Configuring the Wireless Barricade Router Intrusion Detection DMZ Demilitarized Zone Ddns Dynamic DNS Settings UPnP Universal Plug and Play Setting Tools Configuration Tools ToolsTools Firmware Upgrade Tools Reset Status Section DescriptionTroubleshooting Verify your connection to the Wireless BarricadeAm getting an IP Address that starts with Have another IP Address displayed 10/100 LED does not light after a connection is made Temperature Advanced FeaturesIndicator Panel DimensionsHumidity Input PowerInternet Standards CompliancesFCC Class B FCC Radiation Exposure StatementIndustry Canada Class B EC Conformance Declaration Class BLegal Information Contacts Legal Information and Contacts Statement of Conditions Limitation of Liability