SMC Networks SMC7004VWBR V.2 manual Configuring Wireless Barricade Router, Browser Configuration

Page 31

Configuring the Wireless Barricade Router

CONFIGURING THE

WIRELESS BARRICADE

ROUTER

The Wireless Barricade Router can be configured by any Java-supported browser including Internet Explorer 5.0 or above, or Netscape Navigator 4.0 or above. Using the Web management interface, you can configure the Wireless Barricade and view statistics to monitor network activity.

Note: Before you attempt to configure your router, if you have access to the Internet please visit www.smc.com or www.smc-europe.com and download the latest firm- ware update to insure your router is running the latest

Before you attempt to log into the Wireless Barricade’s Web-based Administration, please verify the following.

1.Your browser is configured properly (see below).

2.Disable any firewall or security software that may be running.

3.Confirm that you have a good link LED where your computer is plugged into the Wireless Barricade. If you don’t have a link light – then try another cable until you get a good link.

Browser Configuration

Confirm your browser is configured for a direct connection to the Internet using the Ethernet cable that is installed in the computer.

27

Image 31

Contents SMC7004VWBRV.2 Page Table of Contents Table of Contents For DSL-User without a flat rate contract Why should you do that?Only safe alternative Pull the plug About the Wireless Barricade RouterFeatures and Benefits LED IndicatorsAbout the Wireless Barricade Router Package Contents Installing the Wireless Barricade RouterHardware Description Hardware Description Description System RequirementsConnect the System Basic Installation ProcedurePower on Connect the power adapter to the Wireless Barricade Attach to Your Network Using Radio Signals Internet Connecting the Power AdapterWindows 95/98/Me Installing TCP/IPWindows Setting Up TCP/IP Setting Up TCP/IPConfiguring Your Computer in Windows 95/98/Me Setting Up TCP/IP Obtain IP Settings from Your Wireless Barricade Router Configuring Your Computer in Windows NT Configuring Client TCP/IP Configuring Your Computer in Windows Configuring Your Computer in Windows XP Configuring a Macintosh Computer Manual IP Configuration Page Verifying Your TCP/IP Connection Browser Configuration Configuring Wireless Barricade RouterInternet Explorer 5 or above Disable Proxy ConnectionInternet Explorer For Macintosh Netscape 4 or above Navigating the Web Browser Interface Making Configuration ChangesTime Zone Setup WizardBroadband Type Cable Modem PPPoE xDSL Fixed-IP xDSLPptp Point-to-Point Tunneling Protocol BigPond Menu Description Advanced SetupTime Zone SystemPassword Settings Remote Management WANDynamic IP Point-to-Point Over Ethernet PPPoE Point-to-Point Tunneling Protocol Pptp Static IP BigPond DNS LAN Channel and Ssid WirelessEncryption Advanced Setup Address Mapping Network Address Translation NATVirtual Server Special Applications Firewall Access ControlConfiguring the Wireless Barricade Router MAC Filtering Table URL Blocking Schedule Rule Configuring the Wireless Barricade Router Intrusion Detection DMZ Demilitarized Zone Ddns Dynamic DNS Settings UPnP Universal Plug and Play Setting Tools Tools Configuration ToolsTools Firmware Upgrade Tools Reset Section Description StatusVerify your connection to the Wireless Barricade TroubleshootingAm getting an IP Address that starts with Have another IP Address displayed 10/100 LED does not light after a connection is made Dimensions Advanced FeaturesIndicator Panel TemperatureCompliances Input PowerInternet Standards HumidityFCC Radiation Exposure Statement FCC Class BEC Conformance Declaration Class B Industry Canada Class BLegal Information Contacts Legal Information and Contacts Statement of Conditions Limitation of Liability