Install the software on your computers

Step 1

Install the software on your computers –

1.Switch on the computers that you will connecting the SMC EZ Connect USB Cable and make sure that the USB ports are enabled and working properly.

2.Insert the SMC CD-Rom into the CD-ROM drive and find the installation program. (This should be in directory D:\SMC.exe)

3.The InstallShield Wizard will guide you through step-by-step to complete the installation process.

English

4.The InstallShield Wizard will pop-up a Question Window. If the computer you installed is not a bridge computer or main computer. (please refer to Step 4 – Installaing the SMC EZ Connect USB Bridge Driver) you must click “No”, but if you are on the bridge computer, you have to click ”Yes”. Because this “SMC EZ Connect USB Bridge Protocal” must not be installed on only one computer in the USB network.

5.A window will appear asking if you want to set the IP address for the USB Network Adapter. Click NO to for the IP address to be set up automatically. Only set your own IP address if you are an experienced network administrator or if you are connecting to an Ethernet network. (See Step 4 for more details)

6.During the installations, the system may ask you to insert system disk(i.e Win98 CD-ROM) please insert your system disk your CD-ROM drive then click OK.

7.If the system cannot find any file, please direct to your CD-ROM drive and click OK.

8.The system will ask you to reboot the computer when the installation is complete. Please remove the driver from your CD-ROM drive, connect the EZ Connect USB cable and restart your computer.

Now go through the same process on the other computer(s).

Your USB network environment is set up automatically when the installation is complete. Now you can see all the computers in your network in Network Neighborhood and you can share programs, files and other peripheral devices through the standard Windows interfaces, e.g. Windows Explorer and Network Neighborhood.