8 IPSec Settings Guide (For Reference/Example Only)
8.1 Tunnel between two SMCBR14VPN
The easiest way to construct a VPN tunnel between two sites is to use two SMCBR14VPNs, which are connected to the internet.
The steps to follow to create an IP tunnel between are the following:
•Step 1: Go to the VPN section and select the enable checkbox for [VPN]
•Step 2: Select the number of Tunnels you want to enable
•Step 3: Enter a Tunnel Name, select IKE or MANUAL for the method and click [More]
•Step 4: Local subnet value is the LAN SUBNET
•Step 5: Local netmask value is the LAN SUBNET MASK
•Step 6: Remote subnet value is the LAN SUBNET of the REMOTE NETWORK
•Step 7: Remote netmask value is the LAN SUBNET MASK of the REMOTE NETWORK
•Step 8: Remote gateway value is the WAN IP of the REMOTE NETWORK
•Step 9: Preshare key value is used to determine the network encryption
•Step 10: SAVE SETTINGS and then configure the IKE PROPOSAL and IPSEC PROPOSAL
8.1.1 Settings for Router 1
VPN Router | WAN IP Address: ip1.smc.com |
1 | LAN IP Address: 192.168.1.1 |
PC | 192.168.1.xxx |
47