SMC Networks Wireless Broadband Router Procedure for Hardware Installation, Rear Panel

2.1.2. Rear Panel

	Figure 2-2 Rear Panel
Ports:
Port	Description
ON/OFF	Power switch
DC IN	Power inlet (DC 5V)
COM	Serial port (connect analog modem or console cable)
PRINTER	Printer Port

2.2 Procedure for Hardware Installation

1.Decide where to place your Wireless Broadband Router:

You can place your Wireless Broadband Router on a desk or other flat surface, or you

can mount it on a wall. For optimal performance, place your Wireless Broadband Router in the center of your office (or your home) in a location that is away from any potential source of interference, such as a metal wall or microwave oven. This location must be close to power and network connections.

-10-