SMC Networks Wireless Broadband Router specifications Configuring on Windows NT Platforms

Page 31

3.Choose the “PRTmate: (All-in-1)” from the list attached at the Print To item. Be sure that the Printer Driver item is configured to the correct driver of your server printer.

4.Click on the button of Port Settings:

Type in the IP address of this product and then click the OK button.

5.Make sure that all the settings mentioned above are correct, and then click the OK button.

5.2 Configuring on Windows NT Platforms

The configuration procedure for a Windows NT platform is similar to that of Windows 95/98 except the screen of printer Properties:

-30-

Image 31
Contents User Guide Page FCC Interference Statement TrademarksCE Declaration of Conformity Table of Contents Page Introduction Functions and FeaturesPacking List Port Hardware InstallationPanel Layout Front PanelPage Function Color Status Description Or upgraded. Don’t turn it offPort Description Procedure for Hardware InstallationDecide where to place your Wireless Broadband Router Rear PanelSet up WAN connection your cable/xDSL modem connection Set up LAN connectionPower on Make Correct Network Settings of Your Computer Network Settings and Software InstallationRequest timed out Install the Software into Your ComputersPage Page Startup and Login Configuring Wireless Broadband RouterStatus Toolbox Primary Setup Dial-up Network Static IP AddressDynamic IP Address PPP over EthernetDhcp Server Virtual Server Special AP Access Control Misc. Items Wireless Setting Print Server Configuring on Windows 95/98 PlatformsPage Configuring on Windows NT Platforms Configuring on Windows 2000 Platforms Configuring on Unix-based Platforms Install TCP/IP Protocol into Your PC Appendix a TCP/IP Configuration for Windows 95/98Set TCP/IP Protocol for Working with IP Sharer Page Page Do not input any value in the Gateway tab Choose Disable DNS in the DNS Configuration tab Page