SMC Networks Wireless Broadband Router specifications Power on

Page 13

4.Power on:

By connecting the power cord to the power inlet and turning the power switch on, this product will automatically enter the self-test phase. When it is in the self-test phase, the indicators M1 and M2 will be lighted ON for about 10 seconds, and then M1 and M2 will be flashed 3 times to indicate that the self-test operation has finished. Finally, the M1 will be continuously flashed once per second to indicate that this product is in normal operation.

-12-

Image 13

Contents User Guide Page FCC Interference Statement TrademarksCE Declaration of Conformity Table of Contents Page Introduction Functions and FeaturesPacking List Panel Layout Hardware InstallationFront Panel PortPage Function Color Status Description Or upgraded. Don’t turn it offDecide where to place your Wireless Broadband Router Procedure for Hardware InstallationRear Panel Port DescriptionSet up WAN connection your cable/xDSL modem connection Set up LAN connectionPower on Make Correct Network Settings of Your Computer Network Settings and Software InstallationRequest timed out Install the Software into Your ComputersPage Page Startup and Login Configuring Wireless Broadband RouterStatus Toolbox Primary Setup Dynamic IP Address Static IP AddressPPP over Ethernet Dial-up NetworkDhcp Server Virtual Server Special AP Access Control Misc. Items Wireless Setting Print Server Configuring on Windows 95/98 PlatformsPage Configuring on Windows NT Platforms Configuring on Windows 2000 Platforms Configuring on Unix-based Platforms Install TCP/IP Protocol into Your PC Appendix a TCP/IP Configuration for Windows 95/98Set TCP/IP Protocol for Working with IP Sharer Page Page Do not input any value in the Gateway tab Choose Disable DNS in the DNS Configuration tab Page