Operation, Manual Port Selection, Hot Key Port Selection

Operation

Controlling both PCs in your Master View CS-12 installation from a single console could not be easier. Two port selection methods that provide instant access to either PC are available:

•Manual Port Selection

•Hot Key Port Selection

Note: The CS-12’s Power On default is to link to Port 1. If the PC attached to Port 1 is inactive, the monitor will be blank so it may appear as if the unit is not functioning. This is not the case. Simply use one of the Port Selection methods (described below), to switch to the active PC on Port 2.

Manual Port Selection

With Manual Port Selection you simply press the Port Selection button on the Master View’s right side to switch back and forth between computers. The Selected LED on the top panel lights to indicate which port is active.

Hot Key Port Selection

Hot Key navigation allows you to select the active PC directly from the keyboard, instead of having to manually select it by pressing the Port Selection button. The Master View CS-12 provides several Hot Key navigation features:

•Selecting the Active Port;

•Auto Scan Mode.

•Last/Next Mode

Note: All Hot Key operations begin by pressing and releasing the Alt+Ctrl+Shift combination. The combination must all be on the same side (i.e ., LeftAlt+LeftCtrl+LeftShift or RightAlt+RightCtrl+RightShift).