QVS CS12 manual Hardware Requirements, Console, Cables

Hardware Requirements

Console

•One VGA, SVGA, or Multisync monitor capable of the highest resolution that you will be using on any PC in the installation

•One PS/2 mouse

•One PS/2 style keyboard or AT style keyboard plus keyboard adapter

PC

The following equipment must be installed on each PC that is to be connected to the system:

•A VGA, SVGA or Multisync card.

•A 6-pin mini-DIN (PS/2 style).

•Either a 6-pin mini-DIN (PS/2 Style) keyboard port with +5V DC on pin 4 and Ground on pin 3, or a 5-pin DIN (AT Style) keyboard port with +5V DC on pin 5 and ground on pin 4.*

* See the note under Cables in the next section.

Cables

Although it is possible to use standard extender cables to connect the PCs to the Master View CS-12, for optimum signal integrity and to simplify the layout, we strongly recommend that you use the high quality CS Custom Cables Part Number 2L-1001P/C.

Note: The keyboard and mouse cables have PS/2 style connectors at each end:

•If your PC uses a standard AT style keyboard socket, you will need an AT-to-PS/2 keyboard adapter, in order to plug the cable into the PC’s keyboard port.

•CS-12 does not support Serial Mouse

3