Features and Benefits

Installation Instructions

XVC Series Volume Controls

Xantech’s premier product line of XV volume controls are in-wall mountable stereo speaker volume control with impedance matching capability. From one to eight pairs or stereo speakers may be driven from one stereo power amplifier, using an equal number of XV volume controls. It maintains correct impedance matching between the amplifier and the speakers by the use of instant setting jumpers on the control. This eliminates the need for separate impedance matching components in multi-room installations.

•XVC50, XVD50, XVC50

Power handling: 50 Watts continuous, 150 Watts peak

•XVC100, XVD100, XVCS100, XVCO100, XVCD100IR, XVCS100IR Power handling: 100 Watts continuous, 300 Watts peak

•All Models

Adjustable impedance matching for up to 8 speaker pairs

(1, 2, 4, 8 pairs)
Attenuation:	11 steps plus Off; max 42 dB
Frequency response:	20Hz-20kHz ±1 dB
Speaker Terminals:	16 gauge, Quick Connect (detachable)
Mounting:	Minimum 20 cu. in. J-box or Mud Ring.

Note: Be sure to check fit before choosing J-boxes!

Isolated left- and right-channel grounds ensure safety with any bridged amplifier.

Fluid, pop-free switching during volume adjustments.

Compatible with 4-, 6-, or 8-ohm speaker systems.

UL Listed to comply will all local building codes.

Installation requires only a screwdriver and wire strippers.