Video Compatibility Note

OPERATION NOTES

PLEASE READ THESE NOTES BEFORE INSTALLING OR

OPERATING THE HDMI4X4 MATRIX SWITCHER

•The 4X4 HDMI Matrix is housed in a metal box for better RF shielding.

•The 4X4 HDMI Matrix works with all DVI and HDMI displays.

•The 4X4 HDMI Matrix supports both AUDIO and VIDEO signals.

•The 4X4 HDMI Matrix is fully HDCP compliant.

An HDMI source connects to the HDMI4X4 Matrix Switcher with four input cables and four output cables. Output devices are examined to obtain an EDID, or a data record of the performance characteristics of the display de- vices. The default behavior of this 4X4 HDMI Matrix is to generate an EDID based on the common audio and video features of all connected output display devices. (Please see EDID Mode 6 on Page 5). For example, the display with the lowest native resolution will set the video resolution for all connected display devices.

INSTALLATION INSTRUCTIONS

Connect all HDMI/DVI input sources to the HDMI input jacks on the 4X4 HDMI Matrix, using supplied cables (a DVI source may be connected using a DVI-to-HDMI adapter cable, sold separately). Connect the HDMI/DVI displays to the HDMI output jacks on the 4X4 HDMI Matrix. Connect the 24VDC power tip to the 4X4 HDMI Matrix and plug the AC power cord to a free wall socket. Beautiful, vibrant HD video and multichannel digital audio (if using HDMI) will now be present at the HD display device.

Controlling the 4X4 HDMI Matrix using the RMT16-IR is done as follows:

Press Buttons	To Obtain Switch Behavior
1 to 4	OUTPUT 1: View Source 1, 2, 3, 4
5 to 8	OUTPUT 2: View Source 1, 2, 3, 4
9 to 12	OUTPUT 3: View Source 1, 2, 3, 4
13 to 16	OUTPUT 4: View Source 1, 2, 3, 4

-3-