Xantech HDMI4X4 user manual Resolving Infrared Code Conflicts

Resolving Infrared Code Conflicts

In the event of IR conflicts, please do the following:

1.Remove the battery cover from the back of the RMT16-IR remote.

2.Locate the DIP Switches above the batteries.

3.Switch the DIP Switches on the RMT16-IR to any of the combina- tions pictured below.

4.DIP Switches 1 and 2 in the RMT16-IR infrared remote correspond with DIP Switches 3 and 4 inside the 4X4 HDMI Matrix respectively. Switch the DIP switches inside the 4X4 HDMI Matrix to match the same Remote Channel as the RMT16-IR.

5.The 4X4 Matrix is now set to a new IR Code.

-7-