RMT16-IR INSTALLATION
1.Remove battery cover from the back of the RMT16-IR remote.
2.Verify that DIP switches 1 & 2 are in the down (OFF) position.
3.Insert the battery; hold the battery so that you can see the positive side facing up. The side that is not marked must be facing down.
4.Test the RMT16-IR remote by pressing ONLY one button at a time. The indicator light on the remote will flash once each time you press a button. WARNING: Do not press multiple buttons simulta- neously and do NOT press buttons rapidly. These actions will cause the remote to reset and steps 1-4 will have to be repeated.
5.Note: The RMT16-IR ships with two batteries. One battery is re- quired for operation, the second battery is complimentary.
