RC68+ (IR) COMMANDS
The RC68+ should be set to Group Code “C0”.
|
|
| ZONE 1 | ZONE 2 |
| ZONE 3 | ZONE 4 |
1 | Zone Power Toggle | 80 | 48 |
| 10 | 90 | |
|
|
|
|
|
|
|
|
|
|
| SRC 1 | SRC 2 |
| SRC 3 | SRC 4 |
| Zone 1 Source Select | 00 | C0 |
| 50 | D0 | |
2 | Zone 2 Source Select | 40 | A0 |
| 30 | B0 | |
Zone 3 Source Select | 20 | E0 |
| 70 | F0 | ||
|
| ||||||
| Zone 4 Source Select | 60 | 88 |
| 18 | 98 | |
|
|
|
|
|
|
|
|
|
|
| ZONE 1 | ZONE 2 |
| ZONE 3 | ZONE 4 |
3 | Zone Power On | 08 | A8 |
| 38 | B8 | |
4 | Zone Power Off | 28 | E8 |
| 78 | F8 | |
5 | Zone Power All Off |
|
| 68 |
| ||
6 | Zone Restore All |
|
| C8 |
| ||
7 | Zone Power All On |
|
| 58 |
| ||
Note: For expanded systems, the ‘Primary’ HD44 should remain on the default group code of “C0” but each additional HD44 will need to be changed to a different discrete Code Group so the units can be individually controlled. To change the Group Code of the additional HD44’s please see the RC68X instruction manual (section labeled CHANGING THE INTERNAL CODE GROUP NUMBER OF A XANTECH MODEL) or the Application Advisory
[URL:
http://www.xantech.com/products/a_folder/a_aa 09.pdf
|
|
08905071B | - 9 - |