Seagate ST9120822AB, ST9402116AB, ST960815AB manual Drive specifications, Specification summary

Page 9

2.0Drive specifications

Unless otherwise noted, all specifications are measured under ambient conditions, at 25°C, and nominal power. For convenience, the phrases the drive and this drive are used throughout this manual to indicate ST9160821AB, ST9120822AB, ST9100828AB, ST980815AB, ST960815AB, and ST9402116AB model drives.

2.1Specification summary

The specifications listed in this table are for quick reference. For details on specification measurement or definition, see the appropriate section of this manual.

Table 1:

Specifications for 160 and 120 Gbyte models

 

 

 

 

Drive specification

ST9160821AB

ST9120822AB

 

 

 

Formatted Gbytes (512 bytes/sector)*

160

120

 

 

 

Guaranteed sectors

312,581,808

234,441,648

 

 

 

Bytes per sector

512

 

 

 

 

Physical read/write heads

4

3

 

 

 

 

Discs

 

2

 

 

 

 

Cache (Mbytes)

8

 

 

 

 

Recording density, BPI (bits/inch typical)

835k

 

 

 

 

Track density, TPI (tracks/inch typical)

150k

 

 

 

 

Areal density (Gbits/inch2 max)

132

 

Spindle speed (RPM)

5,400

 

 

 

 

Internal data transfer rate (Mbits/sec max)

352

 

 

 

 

I/O data-transfer rate (Mbytes/sec max)

100

 

 

 

 

ATA data-transfer modes supported

PIO modes 0–4

 

 

 

Multiword DMA modes 0–2

 

 

 

Ultra DMA modes 0–5

 

 

 

 

Height

 

9.5 +/-0.2 mm (0.374 +/-.008 inches)

 

 

 

Width

 

69.85 +/-0.25 mm (2.750 +/-0.010 inches)

 

 

 

Length

 

100.50 +/-0.25 mm (3.957 +/-0.010 inches)

 

 

 

Weight (typical)

100 grams (0.22 lb)

 

 

 

 

Average latency (msec)

5.6

 

 

 

 

Power-on to ready (sec typical)

3.0

 

 

 

 

Standby to ready (sec typical)

3.0

 

 

 

 

Track-to-track seek time (msec typical)

1.0 (read), 1.5 (write)

 

 

 

 

Average random seek , write (msec typical)

13.0

 

 

 

 

Average random seek, read (msec typical)

11.0

 

 

 

 

Average random seek, (msec typical)

12.5

 

 

 

 

Full-stroke seek (msec)

22 (typical); 24 (max)

 

 

 

 

Startup current 5V (typical)

1.0 amps

 

 

 

 

 

Momentus 5400.3 PATA Blade Server Product Manual, Rev. B

3

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Momentus5400.3 Blade Server Page Contents Momentus 5400.3 Pata Blade Server Product Manual, Rev. B List of Figures Momentus 5400.3 Pata Blade Server Product Manual, Rev. B Introduction Momentus 5400.3 Pata Blade Server Product Manual, Rev. B Specification summary Drive specificationsSpecifications for 160 and 120 Gbyte models Drive specification ST9160821AB ST9120822ABSeek power typical Watts Read/write power typical Drive specification ST9100828AB ST980815AB Specifications for 100 and 80 Gbyte modelsTo access the following web Drive specification ST960815AB ST9402116AB Specifications for 60 and 40 Gbyte modelsSpecifications for 60 and 40 Gbyte models LBA mode Default logical geometryFormatted capacity Physical organizationPhysical characteristics Technology SpecificationRecording and interface technology Time to ready Seek timeTypical seek times msec Read Write Time to ready Typical Max @ 25CPower specifications Typical current profile Conducted noiseVoltage tolerance Environmental specifications Operating shock ShockNonoperating shock VibrationElectromagnetic immunity AcousticsDrive level acoustics Electromagnetic immunityMeasurement type Specification Safety certificationReliability Agency certificationKorean RRL Australian C-Tick N176FCC verification Environmental protection Corrosive environmentEuropean Union Restriction of Hazardous Substances RoHS Momentus 5400.3 Pata Blade Server Product Manual, Rev. B Handling and static discharge precautions Configuring and mounting the driveJumper settings Master/slave configurationCable-select option Drive mounting Mounting dimensions-top, side and end viewMomentus 5400.3 Pata Blade Server Product Manual, Rev. B Connector signals ATA interface signals and connector pinsConnector Cable Signal Name Contact Conductor Cable Connector Conductor Contact Signal NameSupported ATA commands Supported commandsCommand name Command code in hex ATA-standard commands Command name Command code in hex ATA-standard power-management commandsATA-standard security commands Supported commands Word Description Value Identify Device commandXx07H Bit Word Description if bit is set to Bit WordFeatures register values Set Features commandInternet Seagate Technology support servicesPresales Support Technical SupportWarranty Service Data Recovery Services Authorized Service CentersData Recovery Services Call Center Toll-free Direct dial Numerics IndexPage TMR Momentus 5400.3 Pata Blade Server Product Manual, Rev. B Page Seagate Technology LLC
Related manuals
Manual 2 pages 34.25 Kb

ST960815AB, ST9120822AB, ST9160821AB, ST9402116AB, ST980815AB specifications

Seagate's lineup of hard drives, including the ST9100828AB, ST980815AB, ST9402116AB, ST9160821AB, and ST9120822AB, showcases the company's commitment to high-performance and reliable data storage solutions.

The ST9100828AB, a 1000 GB SATA hard drive, is known for its impressive capacity and speed. It utilizes Seagate's perpendicular recording technology, allowing for increased data density and improved performance. This model is ideal for desktop and gaming applications, where quick access to large files is essential. The drive features a rotational speed of 7200 RPM, ensuring quick read and write times, which enhances overall system responsiveness.

Next in the lineup is the ST980815AB, designed with 800 GB of storage capacity. This 2.5-inch SATA drive is ideal for laptops and portable applications, delivering a balance of performance and energy efficiency. The ST980815AB incorporates advanced power management features to extend battery life, making it a preferred choice for mobile computing. Its compact design, combined with solid performance metrics, makes it suitable for both personal and professional use.

The ST9402116AB offers a medium capacity of 400 GB, specifically engineered for durability and reliability in external storage applications. Its 5400 RPM speed caters to users who prioritize quiet operation and low power consumption while still providing decent performance for everyday tasks, like document editing, photo storage, and media playback.

For those needing a larger capacity, the ST9160821AB, with 1600 GB of storage, stands out. It offers a blend of speed and storage space, making it great for data-intensive applications such as video editing and gaming. The drive features robust error recovery and data integrity technologies, ensuring the safety and longevity of stored information.

Lastly, the ST9120822AB is a versatile and compact 1200 GB hard drive, perfect for both external and internal use. It combines fast data transfer rates with an attractive performance profile, making it a reliable choice for users who need a balance between speed and capacity.

In conclusion, Seagate's ST9100828AB, ST980815AB, ST9402116AB, ST9160821AB, and ST9120822AB hard drives cater to various storage needs, boasting advanced features, solid performance, and enhanced reliability. Their diverse capacities allow users from gaming enthusiasts to professionals to find a solution that meets their specific requirements.
Top Page Image Contents