Seagate ST9402116AB, ST960815AB, ST980815AB, ST9120822AB, ST9160821AB To access the following web

Page 12

Table 1:

Specifications for 100 and 80 Gbyte models

 

 

 

 

Drive specification

ST9100828AB

ST980815AB

 

 

 

Shock, nonoperating (Gs max at 1 msec)

900

 

 

 

 

Shock, nonoperating (Gs max at 0.5 msec)

400

 

 

 

 

Vibration, operating

1.0 Gs (0 to peak, 5–500 Hz)

 

(max displacement may apply below 10 hz)

 

 

 

 

 

Vibration, nonoperating

5.0 Gs (0 to peak, 5–500 Hz)

 

(max displacement may apply below 22 hz)

 

 

 

 

 

Drive acoustics, sound power (bels), 2 disc

 

 

Idle**

 

2.4 (typical)

 

 

 

2.6 (max)

 

Performance seek

2.9 (typical)

 

 

 

3.1 (max)

 

 

 

 

Nonrecoverable read errors

1 per 1014 bits read

 

Annualized Failure Rate (AFR)

<1.79%

 

 

 

 

Load/Unload (U/UL) cycles

 

 

25°C, 50% relative humidity

600,000 software-controlled power on/off cycles

 

 

20,000 hard power on/off cycles

 

32°C, 80% relative humidity

600,000 software-controlled power on/off cycles

5°C, 80% relative humidity

20,000 hard power on/off cycles

 

5°C, 20% relative humidity

 

 

60°C, 20% relative humidity

 

 

 

 

 

 

Warranty

 

5 years on distribution units.

 

 

 

To determine the warranty for a specific drive, use a web browser

 

 

to access the following web page:

 

 

www.seagate.com/support/service/

 

 

From this page, click on the “Verify Your Warranty” link. You will

 

 

be asked to provide the drive serial number, model number (or

 

 

part number) and country of purchase. The system will display

 

 

the warranty information for your drive.

 

 

 

 

*One Gbyte equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting.

**During periods of drive idle, some offline activity may occur, according to the S.M.A.R.T. specification, which may increase acoustic and power to operational levels.

***Typical notebooks will pull power to the drive when entering S3 and S4; while in the S3 and S4 states, drive sleep and drive standby

modes will not contribute to battery power consumption.

6

Momentus 5400.3 PATA Blade Server Product Manual, Rev. B

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Momentus5400.3 Blade Server Page Contents Momentus 5400.3 Pata Blade Server Product Manual, Rev. B List of Figures Momentus 5400.3 Pata Blade Server Product Manual, Rev. B Introduction Momentus 5400.3 Pata Blade Server Product Manual, Rev. B Drive specifications Specification summarySpecifications for 160 and 120 Gbyte models Drive specification ST9160821AB ST9120822ABSeek power typical Watts Read/write power typical Specifications for 100 and 80 Gbyte models Drive specification ST9100828AB ST980815ABTo access the following web Specifications for 60 and 40 Gbyte models Drive specification ST960815AB ST9402116ABSpecifications for 60 and 40 Gbyte models Default logical geometry LBA modeFormatted capacity Physical organizationPhysical characteristics Technology SpecificationRecording and interface technology Seek time Time to readyTypical seek times msec Read Write Time to ready Typical Max @ 25CPower specifications Typical current profile Conducted noiseVoltage tolerance Environmental specifications Shock Operating shockNonoperating shock VibrationAcoustics Electromagnetic immunityDrive level acoustics Electromagnetic immunitySafety certification Measurement type SpecificationReliability Agency certificationKorean RRL Australian C-Tick N176FCC verification Environmental protection Corrosive environmentEuropean Union Restriction of Hazardous Substances RoHS Momentus 5400.3 Pata Blade Server Product Manual, Rev. B Configuring and mounting the drive Handling and static discharge precautionsJumper settings Master/slave configurationCable-select option Mounting dimensions-top, side and end view Drive mountingMomentus 5400.3 Pata Blade Server Product Manual, Rev. B ATA interface signals and connector pins Connector signalsConnector Cable Signal Name Contact Conductor Cable Connector Conductor Contact Signal NameSupported ATA commands Supported commandsCommand name Command code in hex ATA-standard commands Command name Command code in hex ATA-standard power-management commandsATA-standard security commands Supported commands Identify Device command Word Description ValueXx07H Description if bit is set to Bit Word Bit WordSet Features command Features register valuesSeagate Technology support services InternetPresales Support Technical SupportWarranty Service Data Recovery Services Authorized Service CentersData Recovery Services Call Center Toll-free Direct dial Index NumericsPage TMR Momentus 5400.3 Pata Blade Server Product Manual, Rev. B Page Seagate Technology LLC
Related manuals
Manual 2 pages 34.25 Kb

ST960815AB, ST9120822AB, ST9160821AB, ST9402116AB, ST980815AB specifications

Seagate's lineup of hard drives, including the ST9100828AB, ST980815AB, ST9402116AB, ST9160821AB, and ST9120822AB, showcases the company's commitment to high-performance and reliable data storage solutions.

The ST9100828AB, a 1000 GB SATA hard drive, is known for its impressive capacity and speed. It utilizes Seagate's perpendicular recording technology, allowing for increased data density and improved performance. This model is ideal for desktop and gaming applications, where quick access to large files is essential. The drive features a rotational speed of 7200 RPM, ensuring quick read and write times, which enhances overall system responsiveness.

Next in the lineup is the ST980815AB, designed with 800 GB of storage capacity. This 2.5-inch SATA drive is ideal for laptops and portable applications, delivering a balance of performance and energy efficiency. The ST980815AB incorporates advanced power management features to extend battery life, making it a preferred choice for mobile computing. Its compact design, combined with solid performance metrics, makes it suitable for both personal and professional use.

The ST9402116AB offers a medium capacity of 400 GB, specifically engineered for durability and reliability in external storage applications. Its 5400 RPM speed caters to users who prioritize quiet operation and low power consumption while still providing decent performance for everyday tasks, like document editing, photo storage, and media playback.

For those needing a larger capacity, the ST9160821AB, with 1600 GB of storage, stands out. It offers a blend of speed and storage space, making it great for data-intensive applications such as video editing and gaming. The drive features robust error recovery and data integrity technologies, ensuring the safety and longevity of stored information.

Lastly, the ST9120822AB is a versatile and compact 1200 GB hard drive, perfect for both external and internal use. It combines fast data transfer rates with an attractive performance profile, making it a reliable choice for users who need a balance between speed and capacity.

In conclusion, Seagate's ST9100828AB, ST980815AB, ST9402116AB, ST9160821AB, and ST9120822AB hard drives cater to various storage needs, boasting advanced features, solid performance, and enhanced reliability. Their diverse capacities allow users from gaming enthusiasts to professionals to find a solution that meets their specific requirements.
Top Page Image Contents