Seagate ST9120822AB Configuring and mounting the drive, Handling and static discharge precautions

Page 27

3.0Configuring and mounting the drive

This section contains the specifications and instructions for configuring and mounting the drive.

3.1Handling and static discharge precautions

After unpacking, and before installation, the drive may be exposed to potential handling and electrostatic dis- charge (ESD) hazards. Observe the following standard handling and static-discharge precautions:

Caution:

•Keep the drive in the electrostatic discharge (ESD) bag until you are ready for installation to limit the drive’s exposure to ESD.

•Before handling the drive, put on a grounded wrist strap, or ground yourself frequently by touching the metal chassis of a computer that is plugged into a grounded outlet. Wear a grounded wrist strap throughout the entire installation procedure.

•Handle the drive only by its edges or frame.

•The drive is fragile—handle it with care. Do not press down on the drive top cover.

•Always rest the drive on a padded, antistatic surface until you mount it in the computer.

•Do not touch the connector pins or the printed circuit board.

•Do not remove the factory-installed labels from the drive or cover them with additional labels. Removal voids the warranty. Some factory-installed labels contain information needed to service the drive. Other labels are used to seal out dirt and contamination.

Momentus 5400.3 PATA Blade Server Product Manual, Rev. B

21

Page 26 Page 28
Image 27
Page 26 Page 28
Contents Momentus5400.3 Blade Server Page Contents Momentus 5400.3 Pata Blade Server Product Manual, Rev. B List of Figures Momentus 5400.3 Pata Blade Server Product Manual, Rev. B Introduction Momentus 5400.3 Pata Blade Server Product Manual, Rev. B Drive specification ST9160821AB ST9120822AB Drive specificationsSpecification summary Specifications for 160 and 120 Gbyte modelsSeek power typical Watts Read/write power typical Drive specification ST9100828AB ST980815AB Specifications for 100 and 80 Gbyte modelsTo access the following web Drive specification ST960815AB ST9402116AB Specifications for 60 and 40 Gbyte modelsSpecifications for 60 and 40 Gbyte models Physical organization Default logical geometryLBA mode Formatted capacityPhysical characteristics Technology SpecificationRecording and interface technology Time to ready Typical Max @ 25C Seek timeTime to ready Typical seek times msec Read WritePower specifications Typical current profile Conducted noiseVoltage tolerance Environmental specifications Vibration ShockOperating shock Nonoperating shockElectromagnetic immunity AcousticsElectromagnetic immunity Drive level acousticsAgency certification Safety certificationMeasurement type Specification ReliabilityKorean RRL Australian C-Tick N176FCC verification Environmental protection Corrosive environmentEuropean Union Restriction of Hazardous Substances RoHS Momentus 5400.3 Pata Blade Server Product Manual, Rev. B Handling and static discharge precautions Configuring and mounting the driveJumper settings Master/slave configurationCable-select option Drive mounting Mounting dimensions-top, side and end viewMomentus 5400.3 Pata Blade Server Product Manual, Rev. B Cable Connector Conductor Contact Signal Name ATA interface signals and connector pinsConnector signals Connector Cable Signal Name Contact ConductorSupported ATA commands Supported commandsCommand name Command code in hex ATA-standard commands Command name Command code in hex ATA-standard power-management commandsATA-standard security commands Supported commands Word Description Value Identify Device commandXx07H Bit Word Description if bit is set to Bit WordFeatures register values Set Features commandTechnical Support Seagate Technology support servicesInternet Presales SupportWarranty Service Data Recovery Services Authorized Service CentersData Recovery Services Call Center Toll-free Direct dial Numerics IndexPage TMR Momentus 5400.3 Pata Blade Server Product Manual, Rev. B Page Seagate Technology LLC
Related manuals
Manual 2 pages 34.25 Kb

ST960815AB, ST9120822AB, ST9160821AB, ST9402116AB, ST980815AB specifications

Seagate's lineup of hard drives, including the ST9100828AB, ST980815AB, ST9402116AB, ST9160821AB, and ST9120822AB, showcases the company's commitment to high-performance and reliable data storage solutions.

The ST9100828AB, a 1000 GB SATA hard drive, is known for its impressive capacity and speed. It utilizes Seagate's perpendicular recording technology, allowing for increased data density and improved performance. This model is ideal for desktop and gaming applications, where quick access to large files is essential. The drive features a rotational speed of 7200 RPM, ensuring quick read and write times, which enhances overall system responsiveness.

Next in the lineup is the ST980815AB, designed with 800 GB of storage capacity. This 2.5-inch SATA drive is ideal for laptops and portable applications, delivering a balance of performance and energy efficiency. The ST980815AB incorporates advanced power management features to extend battery life, making it a preferred choice for mobile computing. Its compact design, combined with solid performance metrics, makes it suitable for both personal and professional use.

The ST9402116AB offers a medium capacity of 400 GB, specifically engineered for durability and reliability in external storage applications. Its 5400 RPM speed caters to users who prioritize quiet operation and low power consumption while still providing decent performance for everyday tasks, like document editing, photo storage, and media playback.

For those needing a larger capacity, the ST9160821AB, with 1600 GB of storage, stands out. It offers a blend of speed and storage space, making it great for data-intensive applications such as video editing and gaming. The drive features robust error recovery and data integrity technologies, ensuring the safety and longevity of stored information.

Lastly, the ST9120822AB is a versatile and compact 1200 GB hard drive, perfect for both external and internal use. It combines fast data transfer rates with an attractive performance profile, making it a reliable choice for users who need a balance between speed and capacity.

In conclusion, Seagate's ST9100828AB, ST980815AB, ST9402116AB, ST9160821AB, and ST9120822AB hard drives cater to various storage needs, boasting advanced features, solid performance, and enhanced reliability. Their diverse capacities allow users from gaming enthusiasts to professionals to find a solution that meets their specific requirements.
Top Page Image Contents