Xantech D5RH installation instructions D5KP Speaker Connections

Page 20

D5KP Speaker Connections

The D5RH routes digital audio to connected D5KP Amplifier Keypad where the audio is then amplified and sent to in-room speakers.

WARNING!: The D5KP’s amplifier is capable of powering a single pair of 8-6 Ohm speakers.

DO NOT connect speakers with a rating of less than 6 Ohms! DO NOT connect more than one speaker to either speaker connector of the D5KP. In doing this, damage to the D5KP may occur and will void the products warranty.

To connect speakers to D5KP Amplifier Keypad:

1Ensure that system power is OFF!

2Remove the SPEAKER CONNECTOR from the D5KP Amplifier Keypad

3Strip speaker wire back 1/4"

4Loosen speaker terminal screws on the speaker connectors

5Insert speaker wires into terminals making sure to maintain +/- polarity

6Tighten screws on speaker terminals

7Re-connect the terminal strip to the SPEAKER CONNECTOR on the D5KP Amplifier Keypad

8Connect speaker wires to the room speakers maintaining correct polarity

Figure 3.8: Speaker Connections


08905153B	- 20 -

Image 20

Contents Installation Instructions Important Safety Information Safety InformationOperating Temperatures & Environments Introduction Features D5RH AccessoriesDefining Terms Front PanelZone SourceConnector Function Rear PanelSystem Design Overview/Applications PlanningRetro-Fit Wiring/ Post Construction Pre-ConstructionLocal Sources to Amplifier Keypad Pre-WiringAmplifier Keypad to Speakers Applications Basic 4 Zone, 4 Source SystemSpeakers D5IP CAT Source D5XH Expansion Router Expanded System 4 Sources / 10 Zones + Local SourcesAnalog ConnectionsSource Audio Inputs Digital Coaxial DIG Coax Digital Optical OpticalSource Loop Outputs Source Loop OUT Source Loop Outputs D5-NET Expansion OUTIR OUT/ALL IR OUT IR OutputsZone OUT Zone OUT ConnectionsD5KP Speaker Connections Speaker ConnectionsAuxiliary Power Connector AUX Power OUT AUX Power OUT ConnectionsAC Power Connector Local SourcesD5IP Source Input Wall Plate D5IP IR OUT 14 IR Out to Source ConnectionsAdding Zones D5XH Digital Audio Distribution Hub # of Chassis Max # of ZonesExpansion OUT/EXPANSION Source Loop OUT/SOURCE LoopSettings & Operation DIP Switch SettingsZone Pairing Analog Source Input GainAudio Appendix a Specifications Xantech Limited Warranty