Seagate ST9120826A, ST960814A, ST9100826A Korean RRL, Australian C-Tick N176, FCC verification

Page 23

Korean RRL

If these drives have the Korea Ministry of Information and Communication (MIC) logo, they comply with para- graph 1 of Article 11 of the Electromagnetic Compatibility control Regulation and meet the Electromagnetic Compatibility (EMC) Framework requirements of the Radio Research Laboratory (RRL) Ministry of Information and Communication Republic of Korea.

These drives have been tested and comply with the Electromagnetic Interference/Electromagnetic Susceptibil- ity (EMI/EMS) for Class B products. Drives are tested in a representative, end-user system by a Korean-recog- nized lab.

•Family name: Momentus 5400.2

•Certificate numbers: E-D011-05-2395 (B)

Australian C-Tick (N176)

If these models have the C-Tick marking, they comply with the Australia/New Zealand Standard AS/NZS3548 1995 and meet the Electromagnetic Compatibility (EMC) Framework requirements of the Australian Communi- cation Authority (ACA).

2.14.3FCC verification

These drives are intended to be contained solely within a personal computer or similar enclosure (not attached as an external device). As such, each drive is considered to be a subassembly even when it is individually mar- keted to the customer. As a subassembly, no Federal Communications Commission verification or certification of the device is required.

Seagate Technology LLC has tested this device in enclosures as described above to ensure that the total assembly (enclosure, disc drive, motherboard, power supply, etc.) does comply with the limits for a Class B computing device, pursuant to Subpart J, Part 15 of the FCC rules. Operation with noncertified assemblies is likely to result in interference to radio and television reception.

Radio and television interference. This equipment generates and uses radio frequency energy and if not installed and used in strict accordance with the manufacturer’s instructions, may cause interference to radio and television reception.

This equipment is designed to provide reasonable protection against such interference in a residential installa- tion. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio or television, which can be determined by turning the equipment on and off, you are encouraged to try one or more of the following corrective measures:

•Reorient the receiving antenna.

•Move the device to one side or the other of the radio or TV.

•Move the device farther away from the radio or TV.

•Plug the computer into a different outlet so that the receiver and computer are on different branch outlets.

If necessary, you should consult your dealer or an experienced radio/television technician for additional sug- gestions. You may find helpful the following booklet prepared by the Federal Communications Commission: How to Identify and Resolve Radio-Television Interference Problems. This booklet is available from the Super- intendent of Documents, U.S. Government Printing Office, Washington, DC 20402. Refer to publication num- ber 004-000-00345-4.

Momentus 5400 FDE Product Manual, Rev. C

17

Page 22 Page 24
Image 23
Page 22 Page 24
Contents ST9120826A ST9100826A ST980821A ST960814A ST940811A Momentus5400 FDEPage Contents Compatibility summary Seagate Technology support servicesATA interface List of Figures Momentus 5400 FDE Product Manual, Rev. C System requirements IntroductionDrive state upon shipment Feature listAbout Momentus 5400 FDE disc drives BenefitsPage Momentus 5400 FDE Product Manual, Rev. C Specifications Drive specificationsSpecification summary Specifications Physical organization Default logical geometryLBA mode Formatted capacityRecording and interface technology Physical characteristicsTechnology Specification Time to ready Typical Max @ 25C Seek timeTime to ready Typical seek times msec Read WritePower specifications Voltage tolerance Typical current profileConducted noise Idle mode Power-management modesPower management modes Active modeEnvironmental specifications Acoustics Performance Reference Test Description Level Standard Electromagnetic immunityElectromagnetic immunity Agency certification Safety certificationMeasurement type Specification ReliabilityFCC verification Korean RRLAustralian C-Tick N176 European Union Restriction of Hazardous Substances RoHS Environmental protectionCorrosive environment Handling and static discharge precautions Configuring and mounting the driveCable-select option Jumper settingsMaster/slave configuration Drive mountingMounting dimensions-top, side and end view Momentus 5400 FDE drive label example Drive integrationSecurity Erase procedure Security Erase--ATA security commandsDrive installation Security Thaw commandDrive State after security erase Cable Connector Conductor Contact Signal Name ATA interface signals and connector pinsConnector signals Connector Cable Signal Name Contact ConductorPIO Read -- Interrupts Enabled mode ATA interface specificationsLegacy mode -- Multi-word DMA not supported Interrupts Disabled mode nIEN bitATA Security policy exceptions Device 0 only configurationsAdditional technical notes Word ContentATA Security Erase Unit bits Ident Value BIT set Bit Description Drive Trust Mode supportedDrive Trust Identify Full-disc Encryption Identify Full Disc Encryption supportNormal Commands Supported ATA commandsSupported commands Read Multiple EXT SET MAX Unlock Aborted Executable AbortedWord Description Value Identify Device commandXx00H Bit Word Description if bit is set to Bit WordFeatures register values Set Features commandCompatibility summary Installation considerationsTested systems Bios versions testedTested Bios versions System CompatibilityOperating systems tested Compatibility test configurationsOperating system versions tested Software utilitiesThird party software support Technical Support Seagate Technology support servicesInternet Presales SupportData Recovery Services Call Center Toll-free Direct dial Warranty ServiceData Recovery Services Authorized Service Centers Numerics IndexPage Page Momentus 5400 FDE Product Manual, Rev. C Page Seagate Technology LLC

ST940811A, ST960814A, ST9120826A, ST980821A, ST9100826A specifications

Seagate's ST9100826A, ST980821A, ST9120826A, ST960814A, and ST940811A hard drives represent some of the company's commitment to providing reliable and high-performance storage solutions. Each model features distinct specifications and technologies that cater to various data storage needs.

The ST9100826A is a 100 GB hard drive that utilizes a 7200 RPM spindle speed, ensuring quick data access and transfer rates. With an IDE interface, this drive supports a data transfer rate of up to 100 MB/s, making it suitable for intensive applications. Additionally, the ST9100826A comes equipped with a 2 MB cache, optimizing data retrieval speeds and enhancing overall performance.

Moving to the ST980821A, this 80 GB drive also operates at 7200 RPM and features a similar IDE interface, which offers compatible integration with various systems. Designed with reliability in mind, it boasts a mean time between failures (MTBF) rating of 1 million hours, appealing to users who prioritize durability. This drive’s compact size allows it to fit seamlessly into a range of configurations, from personal computers to external enclosures.

The ST9120826A, with a substantial capacity of 120 GB, continues the trend of high-performance drives in this lineup. Its 7200 RPM speed and 2 MB cache ensure that users experience efficient data handling. With a more advanced read/write head technology, the drive also minimizes noise during operation, making it suitable for both desktop environments and home media centers.

The ST960814A comes with a 60 GB storage capacity and features an ultra-slim design, making it an excellent choice for portable devices. Often favored by users needing external storage for laptops or gaming consoles, this model maintains a 5400 RPM speed while providing commendable performance and durability, making data retrieval swift and smooth.

Lastly, the ST940811A, featuring a compact 40 GB capacity, serves as a versatile option for users looking to upgrade their existing systems. With an IDE connection and a design focused on energy efficiency, this drive is perfect for economical builds while still providing good performance for standard applications.

In summary, Seagate’s ST9100826A, ST980821A, ST9120826A, ST960814A, and ST940811A each demonstrate innovative features and reliability across various storage needs. With diverse capacities, spindle speeds, and robust technologies, they solidify Seagate’s reputation as a leader in data storage solutions.
Top Page Image Contents