Seagate ST940811A, ST960814A, ST9100826A, ST980821A Set Features command, Features register values

Page 44

4.1.8Set Features command

This command controls the implementation of various features that the drive supports. When the drive receives this command, it sets BSY, checks the contents of the Features register, clears BSY and generates an inter- rupt. If the value in the register does not represent a feature that the drive supports, the command is aborted. Power-on default has the read look-ahead and write caching features enabled. The acceptable values for the Features register are defined as follows:

Table 12:

Features register values

 

 

 

02H

Enable write cache (default).

03H

Set transfer mode (based on value in Sector Count register).

 

Sector Count register values:

 

 

 

 

 

00H

 

Set PIO mode to default (PIO mode 2).

 

 

 

 

 

01H

 

Set PIO mode to default and disable IORDY (PIO mode 2).

 

 

 

 

 

08H

 

PIO mode 0

 

 

 

 

 

09H

 

PIO mode 1

 

 

 

 

 

0AH

 

PIO mode 2

 

 

 

 

 

0BH

 

PIO mode 3

 

 

 

 

 

0CH

 

PIO mode 4 (default)

 

 

 

 

 

20H

 

Abort, note supported

 

 

 

 

 

21H

 

Abort, note supported

 

 

 

 

 

22H

 

Abort, note supported

 

 

 

 

 

40H

 

Ultra DMA mode 0

 

 

 

 

 

41H

 

Ultra DMA mode 1

 

 

 

 

 

42H

 

Ultra DMA mode 2

 

 

 

 

 

43H

 

Ultra DMA mode 3

 

 

 

 

 

44H

 

Ultra DMA mode 4

 

 

 

 

 

45H

 

Ultra DMA mode 5

 

 

 

05H

Enable advanced power management

 

 

55H

Disable read look-ahead (read cache) feature.

 

 

82H

Disable write cache.

 

 

AAH

Enable read look-ahead (read cache) feature (default).

 

 

F1H

Report full capacity available

 

 

 

 

Note. At power-on or after a hardware or software reset the default values of the features are as indicated above.

38

Momentus 5400 FDE Product Manual, Rev. C

Page 43 Page 45
Image 44
Page 43 Page 45
Contents Momentus5400 FDE ST9120826A ST9100826A ST980821A ST960814A ST940811APage Contents Compatibility summary Seagate Technology support servicesATA interface List of Figures Momentus 5400 FDE Product Manual, Rev. C Introduction System requirementsFeature list About Momentus 5400 FDE disc drivesBenefits Drive state upon shipmentPage Momentus 5400 FDE Product Manual, Rev. C Specifications Drive specificationsSpecification summary Specifications Default logical geometry LBA modeFormatted capacity Physical organizationRecording and interface technology Physical characteristicsTechnology Specification Seek time Time to readyTypical seek times msec Read Write Time to ready Typical Max @ 25CPower specifications Voltage tolerance Typical current profileConducted noise Power-management modes Power management modesActive mode Idle modeEnvironmental specifications Acoustics Performance Reference Test Description Level Standard Electromagnetic immunityElectromagnetic immunity Safety certification Measurement type SpecificationReliability Agency certificationFCC verification Korean RRLAustralian C-Tick N176 European Union Restriction of Hazardous Substances RoHS Environmental protectionCorrosive environment Configuring and mounting the drive Handling and static discharge precautionsJumper settings Master/slave configurationDrive mounting Cable-select optionMounting dimensions-top, side and end view Drive integration Momentus 5400 FDE drive label exampleSecurity Erase--ATA security commands Drive installationSecurity Thaw command Security Erase procedureDrive State after security erase ATA interface signals and connector pins Connector signalsConnector Cable Signal Name Contact Conductor Cable Connector Conductor Contact Signal NameATA interface specifications Legacy mode -- Multi-word DMA not supportedInterrupts Disabled mode nIEN bit PIO Read -- Interrupts Enabled modeDevice 0 only configurations ATA Security policy exceptionsAdditional technical notes Word ContentATA Security Erase Unit bits Ident Value BIT set Bit Description Drive Trust Mode supportedDrive Trust Identify Full Disc Encryption support Full-disc Encryption IdentifyNormal Commands Supported ATA commandsSupported commands Read Multiple EXT SET MAX Unlock Aborted Aborted ExecutableIdentify Device command Word Description ValueXx00H Description if bit is set to Bit Word Bit WordSet Features command Features register valuesInstallation considerations Compatibility summaryBios versions tested Tested Bios versionsSystem Compatibility Tested systemsCompatibility test configurations Operating system versions testedSoftware utilities Operating systems testedThird party software support Seagate Technology support services InternetPresales Support Technical SupportData Recovery Services Call Center Toll-free Direct dial Warranty ServiceData Recovery Services Authorized Service Centers Index NumericsPage Page Momentus 5400 FDE Product Manual, Rev. C Page Seagate Technology LLC

ST940811A, ST960814A, ST9120826A, ST980821A, ST9100826A specifications

Seagate's ST9100826A, ST980821A, ST9120826A, ST960814A, and ST940811A hard drives represent some of the company's commitment to providing reliable and high-performance storage solutions. Each model features distinct specifications and technologies that cater to various data storage needs.

The ST9100826A is a 100 GB hard drive that utilizes a 7200 RPM spindle speed, ensuring quick data access and transfer rates. With an IDE interface, this drive supports a data transfer rate of up to 100 MB/s, making it suitable for intensive applications. Additionally, the ST9100826A comes equipped with a 2 MB cache, optimizing data retrieval speeds and enhancing overall performance.

Moving to the ST980821A, this 80 GB drive also operates at 7200 RPM and features a similar IDE interface, which offers compatible integration with various systems. Designed with reliability in mind, it boasts a mean time between failures (MTBF) rating of 1 million hours, appealing to users who prioritize durability. This drive’s compact size allows it to fit seamlessly into a range of configurations, from personal computers to external enclosures.

The ST9120826A, with a substantial capacity of 120 GB, continues the trend of high-performance drives in this lineup. Its 7200 RPM speed and 2 MB cache ensure that users experience efficient data handling. With a more advanced read/write head technology, the drive also minimizes noise during operation, making it suitable for both desktop environments and home media centers.

The ST960814A comes with a 60 GB storage capacity and features an ultra-slim design, making it an excellent choice for portable devices. Often favored by users needing external storage for laptops or gaming consoles, this model maintains a 5400 RPM speed while providing commendable performance and durability, making data retrieval swift and smooth.

Lastly, the ST940811A, featuring a compact 40 GB capacity, serves as a versatile option for users looking to upgrade their existing systems. With an IDE connection and a design focused on energy efficiency, this drive is perfect for economical builds while still providing good performance for standard applications.

In summary, Seagate’s ST9100826A, ST980821A, ST9120826A, ST960814A, and ST940811A each demonstrate innovative features and reliability across various storage needs. With diverse capacities, spindle speeds, and robust technologies, they solidify Seagate’s reputation as a leader in data storage solutions.
Top Page Image Contents