Seagate ST9100824SB, ST98823SB, ST96812SB, ST94813SB, ST9120821SB manual Power specifications

Page 14

2.9Power specifications

The drive receives DC power (+5V) through a native SATA power connector.

2.9.1Power consumption

Power requirements for the drives are listed in the table on page 8. Typical power measurements are based on an average of drives tested, under nominal conditions, at 25°C ambient temperature, after 25 minutes of oper- ation.

Spinup power

Spinup power is measured from the time of power-on to the time that the drive spindle reaches operating speed.

Seek mode

During seek mode, the read/write actuator arm moves toward a specific position on the disc surface and does not execute a read or write operation. Servo electronics are active. Seek mode power is measured based on three random seek operations every 100 msecs. This mode is not typical.

Read/write power and current

Read/write power is measured with the heads on track, based on three 63 sector read or write operations every 100 msecs.

Idle mode power

Idle mode power is measured with the drive up to speed, with servo electronics active and with the heads in a random track location.

Standby mode

During Standby mode, the drive accepts commands, but the drive is not spinning, and the servo and read/ write electronics are in power-down model

Table 3:

DC power

 

 

 

Power dissipation

+5V input average (25° C)

 

 

 

Spinup

 

1.1 A

 

 

 

Seek

 

2.20 watts

 

 

 

Read

 

1.90 watts

 

 

 

Write

 

2.30 watts

 

 

Idle, performance mode*

1.70 watts

 

 

 

Idle, active*

 

0.99 watts

 

 

Idle, low power mode*

0.80 watts

 

 

 

Standby

 

0.28 watts

 

 

 

Sleep

 

0.28 watts

 

 

 

*During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and power to operational levels.

8

Momentus 5400.2 SATA Blade Server Product Manual, Rev. B

Image 14
Contents Momentus 5400.2 Sata ST9120821SB ST9100824SB ST98823SB ST96812SB ST94813SBPage Contents Momentus 5400.2 Sata Blade Server Product Manual, Rev. B List of Figures Page Introduction Momentus 5400.2 Sata disc driveAbout the Serial ATA interface Drive specifications Specification summary tableLoad/Unload U/UL cycles 25C, 50% relative humidity Formatted capacity Default logical geometryLBA mode Cylinders Read/write heads Sectors per track 16,383Physical organization Physical characteristicsDrive specification Recording and interface technologyTypical seek times Seek timeTime to ready Typical seek times msec Read WritePower specifications Deferred spinup Additional detailsEnvironmental specifications Nonoperating shock ShockOperating shock VibrationDrive level acoustics AcousticsElectromagnetic immunity Radio frequency environmentsReliability Safety certificationMeasurement type Specification Agency certificationFCC verification Korean RRLAustralian C-Tick N176 European Union Restriction of Hazardous Substances RoHS Environmental protectionCorrosive environment Momentus 5400.2 Sata Blade Server Product Manual, Rev. B Configuring and mounting the drive Handling and static-discharge precautionsConfiguring the drive Serial ATA cables and connectorsMounting dimensions-top, side and end view Drive mountingMomentus 5400.2 Sata Blade Server Product Manual, Rev. B Serial ATA Sata interface Serial ATA connector pin definitionsSignal Segment Pin Function DefinitionPin Function Definition P10 Ground 2nd mate P11 ReservedSupported ATA commands Command name Command code in hex ATA-standard commandsCommand name Command code in hex ATA-standard security commandsMomentus 5400.2 Sata Blade Server Product Manual, Rev. B Identify Device command Word Description ValueXx07H Description if bit is set to Bit Word Bit WordSet Features command Set Features command valuesCode in features register A.R.T. command 3 S.M.A.R.T. commandsA.R.T. commands Presales Support Seagate Technology support servicesInternet Technical SupportData Recovery Services Call Center Toll-free Direct dial Warranty ServiceData Recovery Services Authorized Service Centers Index ITE Sata Momentus 5400.2 Sata Blade Server Product Manual, Rev. B Page Seagate Technology LLC

ST96812SB, ST9100824SB, ST94813SB, ST9120821SB, ST98823SB specifications

The Seagate series of hard drives, including the ST98823SB, ST9120821SB, ST94813SB, ST9100824SB, and ST96812SB, have been pivotal in the evolution of data storage solutions. Each model features specific enhancements that cater to different storage needs, while still reflecting Seagate's commitment to quality and performance.

The ST98823SB is a high-capacity hard drive designed primarily for enterprise use. One of its key features is its 7200 RPM spindle speed, which ensures fast data access and transfer rates. This drive typically supports Ultra ATA/133 interface, which enhances its data transfer capabilities. The robust design and high MTBF (Mean Time Between Failures) rating of the ST98823SB make it a reliable option for critical applications and large data storage.

Moving on to the ST9120821SB, this model emphasizes storage efficiency and reliability. With a capacity of around 120GB, it is ideal for storing operating systems and essential applications. The ST9120821SB also boasts a 7200 RPM speed, ensuring quick load times. This drive often features advanced power management technologies, reducing energy consumption while maintaining high performance, making it suitable for both desktop and server environments.

The ST94813SB is designed with a balance between performance and capacity. It typically offers a 48GB storage solution, catering to users who require speed without needing extensive space. With its SATA interface and a rotational speed of 7200 RPM, this drive supports high-performance applications while ensuring data integrity and reliability.

The ST9100824SB enhances the user experience with its 2.5-inch form factor, making it suitable for laptops and portable devices. With storage capacities around 100GB, this drive is designed to be energy-efficient, reducing the overall power consumption of mobile devices. It also utilizes advanced caching algorithms for improved performance, particularly in read operations.

Lastly, the ST96812SB stands out for its robust architecture, designed to withstand the rigorous demands of industrial applications. With a spin speed of 7200 RPM and a SATA interface, this drive offers a commendable mixture of speed and durability. It is often used in environment-sensitive applications where reliability is crucial.

Together, these Seagate models represent a diverse range of storage solutions, each tailored to meet specific consumer demands while ensuring reliable performance and impressive technology features.