Seagate ST9100824SB, ST98823SB, ST96812SB Reliability, Agency certification, Safety certification

Page 19

2.13

Reliability

 

 

 

Measurement type

Specification

 

 

Nonrecoverable read errors

1 per 1014 bits read, max.

Annualized Failure Rate (AFR)

1.74% at maximum case temperature of 40°C and 8,760 power on hours (POH).

 

 

Load/Unload (U/UL)

 

25°C, 50% relative humidity

600,000 software-controlled power on/off cycles

 

 

20,000 hard power on/off cycles

32°C, 80% relative humidity

600,000 software-controlled power on/off cycles

5°C, 80% relative humidity

20,000 hard power on/off cycles

5°C, 10% relative humidity

 

55°C, 16% relative humidity

 

 

 

Service Life

5 years

 

 

 

Warranty

 

5 years on distribution units.

 

 

To determine the warranty for a specific drive, use a web browser to access the

 

 

following web page:

 

 

www.seagate.com/support/service/

 

 

From this page, click on the “Verify Your Warranty” link. You will be asked to pro-

 

 

vide the drive serial number, model number (or part number) and country of pur-

 

 

chase. The system will display the warranty information for your drive.

 

 

 

2.14Agency certification

2.14.1Safety certification

The drives are recognized in accordance with UL 1950 and CSA C22.2 (950) and meet all applicable sections of IEC950 and EN 60950 as tested by TUV North America.

2.14.2Electromagnetic compatibility

Hard drives that display the CE mark comply with the European Union (EU) requirements specified in the Elec- tromagnetic Compatibility Directive (89/336/EEC). Testing is performed to the levels specified by the product standards for Information Technology Equipment (ITE). Emission levels are defined by EN 55022, Class B and the immunity levels are defined by EN 55024.

Seagate uses an independent laboratory to confirm compliance with the EC directives specified in the previous paragraph. Drives are tested in representative end-user systems. Although CE-marked Seagate drives comply with the directives when used in the test systems, we cannot guarantee that all systems will comply with the directives. The drive is designed for operation inside a properly designed enclosure, with properly shielded I/O cable (if necessary) and terminators on all unused I/O ports. Computer manufacturers and system integrators should confirm EMC compliance and provide CE marking for their products.

Momentus 5400.2 SATA Blade Server Product Manual, Rev. B

13

Page 18 Page 20
Image 19
Page 18 Page 20
Contents ST9120821SB ST9100824SB ST98823SB ST96812SB ST94813SB Momentus 5400.2 SataPage Contents Momentus 5400.2 Sata Blade Server Product Manual, Rev. B List of Figures Page Momentus 5400.2 Sata disc drive IntroductionAbout the Serial ATA interface Specification summary table Drive specificationsLoad/Unload U/UL cycles 25C, 50% relative humidity Cylinders Read/write heads Sectors per track 16,383 Default logical geometryLBA mode Formatted capacityRecording and interface technology Physical characteristicsDrive specification Physical organizationTypical seek times msec Read Write Seek timeTime to ready Typical seek timesPower specifications Additional details Deferred spinupEnvironmental specifications Vibration ShockOperating shock Nonoperating shockRadio frequency environments AcousticsElectromagnetic immunity Drive level acousticsAgency certification Safety certificationMeasurement type Specification ReliabilityAustralian C-Tick N176 Korean RRLFCC verification Corrosive environment Environmental protectionEuropean Union Restriction of Hazardous Substances RoHS Momentus 5400.2 Sata Blade Server Product Manual, Rev. B Handling and static-discharge precautions Configuring and mounting the driveSerial ATA cables and connectors Configuring the driveDrive mounting Mounting dimensions-top, side and end viewMomentus 5400.2 Sata Blade Server Product Manual, Rev. B Segment Pin Function Definition Serial ATA connector pin definitionsSignal Serial ATA Sata interfaceP10 Ground 2nd mate P11 Reserved Pin Function DefinitionCommand name Command code in hex ATA-standard commands Supported ATA commandsATA-standard security commands Command name Command code in hexMomentus 5400.2 Sata Blade Server Product Manual, Rev. B Word Description Value Identify Device commandXx07H Bit Word Description if bit is set to Bit WordSet Features command values Set Features commandA.R.T. commands 3 S.M.A.R.T. commandsCode in features register A.R.T. command Technical Support Seagate Technology support servicesInternet Presales SupportData Recovery Services Authorized Service Centers Warranty ServiceData Recovery Services Call Center Toll-free Direct dial Index ITE Sata Momentus 5400.2 Sata Blade Server Product Manual, Rev. B Page Seagate Technology LLC

ST96812SB, ST9100824SB, ST94813SB, ST9120821SB, ST98823SB specifications

The Seagate series of hard drives, including the ST98823SB, ST9120821SB, ST94813SB, ST9100824SB, and ST96812SB, have been pivotal in the evolution of data storage solutions. Each model features specific enhancements that cater to different storage needs, while still reflecting Seagate's commitment to quality and performance.

The ST98823SB is a high-capacity hard drive designed primarily for enterprise use. One of its key features is its 7200 RPM spindle speed, which ensures fast data access and transfer rates. This drive typically supports Ultra ATA/133 interface, which enhances its data transfer capabilities. The robust design and high MTBF (Mean Time Between Failures) rating of the ST98823SB make it a reliable option for critical applications and large data storage.

Moving on to the ST9120821SB, this model emphasizes storage efficiency and reliability. With a capacity of around 120GB, it is ideal for storing operating systems and essential applications. The ST9120821SB also boasts a 7200 RPM speed, ensuring quick load times. This drive often features advanced power management technologies, reducing energy consumption while maintaining high performance, making it suitable for both desktop and server environments.

The ST94813SB is designed with a balance between performance and capacity. It typically offers a 48GB storage solution, catering to users who require speed without needing extensive space. With its SATA interface and a rotational speed of 7200 RPM, this drive supports high-performance applications while ensuring data integrity and reliability.

The ST9100824SB enhances the user experience with its 2.5-inch form factor, making it suitable for laptops and portable devices. With storage capacities around 100GB, this drive is designed to be energy-efficient, reducing the overall power consumption of mobile devices. It also utilizes advanced caching algorithms for improved performance, particularly in read operations.

Lastly, the ST96812SB stands out for its robust architecture, designed to withstand the rigorous demands of industrial applications. With a spin speed of 7200 RPM and a SATA interface, this drive offers a commendable mixture of speed and durability. It is often used in environment-sensitive applications where reliability is crucial.

Together, these Seagate models represent a diverse range of storage solutions, each tailored to meet specific consumer demands while ensuring reliable performance and impressive technology features.
Top Page Image Contents