Seagate ST98823SB, ST96812SB, ST94813SB, ST9120821SB, ST9100824SB Set Features command values

Page 35

Bit

Word 93

131 = 80-conductor cable detected, CBLID above VIH 0 = 40-conductor cable detected, CBLID below VIL

4.3.2Set Features command

This command controls the implementation of various features that the drive supports. When the drive receives this command, it sets BSY, checks the contents of the Features register, clears BSY and generates an inter- rupt. If the value in the register does not represent a feature that the drive supports, the command is aborted. Power-on default has the read look-ahead and write caching features enabled. The acceptable values for the Features register are defined as follows:

Table 7: Set Features command values

02H

Enable write cache (default).

03H

Set transfer mode (based on value in Sector Count register).

 

Sector Count register values:

 

00H

Set PIO mode to default (PIO mode 2).

 

01H

Set PIO mode to default and disable IORDY (PIO mode 2).

 

08H

PIO mode 0

 

09H

PIO mode 1

 

0AH

PIO mode 2

 

0BH

PIO mode 3

 

0CH

PIO mode 4 (default)

 

20H

Multiword DMA mode 0

 

21H

Multiword DMA mode 1

 

22H

Multiword DMA mode 2

 

40H

Ultra DMA mode 0

 

41H

Ultra DMA mode 1

 

42H

Ultra DMA mode 2

 

43H

Ultra DMA mode 3

 

44H

Ultra DMA mode 4

 

45H

Ultra DMA mode 5

55H

Disable read look-ahead (read cache) feature.

82H

Disable write cache

AAH

Enable read look-ahead (read cache) feature (default).

F1H

Report full capacity available

Note. At power-on, or after a hardware or software reset, the default values of the features are as indi- cated above.

Momentus 5400.2 SATA Blade Server Product Manual, Rev. B

29

Page 34 Page 36
Image 35
Page 34 Page 36
Contents ST9120821SB ST9100824SB ST98823SB ST96812SB ST94813SB Momentus 5400.2 SataPage Contents Momentus 5400.2 Sata Blade Server Product Manual, Rev. B List of Figures Page Momentus 5400.2 Sata disc drive IntroductionAbout the Serial ATA interface Specification summary table Drive specificationsLoad/Unload U/UL cycles 25C, 50% relative humidity Cylinders Read/write heads Sectors per track 16,383 Default logical geometryLBA mode Formatted capacityRecording and interface technology Physical characteristicsDrive specification Physical organizationTypical seek times msec Read Write Seek timeTime to ready Typical seek timesPower specifications Additional details Deferred spinupEnvironmental specifications Vibration ShockOperating shock Nonoperating shockRadio frequency environments AcousticsElectromagnetic immunity Drive level acousticsAgency certification Safety certificationMeasurement type Specification ReliabilityFCC verification Korean RRLAustralian C-Tick N176 European Union Restriction of Hazardous Substances RoHS Environmental protectionCorrosive environment Momentus 5400.2 Sata Blade Server Product Manual, Rev. B Handling and static-discharge precautions Configuring and mounting the driveSerial ATA cables and connectors Configuring the driveDrive mounting Mounting dimensions-top, side and end viewMomentus 5400.2 Sata Blade Server Product Manual, Rev. B Segment Pin Function Definition Serial ATA connector pin definitionsSignal Serial ATA Sata interfaceP10 Ground 2nd mate P11 Reserved Pin Function DefinitionCommand name Command code in hex ATA-standard commands Supported ATA commandsATA-standard security commands Command name Command code in hexMomentus 5400.2 Sata Blade Server Product Manual, Rev. B Word Description Value Identify Device commandXx07H Bit Word Description if bit is set to Bit WordSet Features command values Set Features commandCode in features register A.R.T. command 3 S.M.A.R.T. commandsA.R.T. commands Technical Support Seagate Technology support servicesInternet Presales SupportData Recovery Services Call Center Toll-free Direct dial Warranty ServiceData Recovery Services Authorized Service Centers Index ITE Sata Momentus 5400.2 Sata Blade Server Product Manual, Rev. B Page Seagate Technology LLC

ST96812SB, ST9100824SB, ST94813SB, ST9120821SB, ST98823SB specifications

The Seagate series of hard drives, including the ST98823SB, ST9120821SB, ST94813SB, ST9100824SB, and ST96812SB, have been pivotal in the evolution of data storage solutions. Each model features specific enhancements that cater to different storage needs, while still reflecting Seagate's commitment to quality and performance.

The ST98823SB is a high-capacity hard drive designed primarily for enterprise use. One of its key features is its 7200 RPM spindle speed, which ensures fast data access and transfer rates. This drive typically supports Ultra ATA/133 interface, which enhances its data transfer capabilities. The robust design and high MTBF (Mean Time Between Failures) rating of the ST98823SB make it a reliable option for critical applications and large data storage.

Moving on to the ST9120821SB, this model emphasizes storage efficiency and reliability. With a capacity of around 120GB, it is ideal for storing operating systems and essential applications. The ST9120821SB also boasts a 7200 RPM speed, ensuring quick load times. This drive often features advanced power management technologies, reducing energy consumption while maintaining high performance, making it suitable for both desktop and server environments.

The ST94813SB is designed with a balance between performance and capacity. It typically offers a 48GB storage solution, catering to users who require speed without needing extensive space. With its SATA interface and a rotational speed of 7200 RPM, this drive supports high-performance applications while ensuring data integrity and reliability.

The ST9100824SB enhances the user experience with its 2.5-inch form factor, making it suitable for laptops and portable devices. With storage capacities around 100GB, this drive is designed to be energy-efficient, reducing the overall power consumption of mobile devices. It also utilizes advanced caching algorithms for improved performance, particularly in read operations.

Lastly, the ST96812SB stands out for its robust architecture, designed to withstand the rigorous demands of industrial applications. With a spin speed of 7200 RPM and a SATA interface, this drive offers a commendable mixture of speed and durability. It is often used in environment-sensitive applications where reliability is crucial.

Together, these Seagate models represent a diverse range of storage solutions, each tailored to meet specific consumer demands while ensuring reliable performance and impressive technology features.
Top Page Image Contents