Seagate ST1000DM003, STBD3000100 Document Revision History, Revision Date Description of Change

Page 2

Document Revision History

Revision

Date

Description of Change

 

 

 

Rev. A

08/19/2011

Initial release.

 

 

 

Rev. B

09/01/2011

Updated decibel specifications, start/stop times; Table 3; mounting drawing.

 

 

 

Rev. C

10/20/2011

Updated voltage tolerance specifications.

 

 

 

Rev. D

01/17/2012

Corrected Table 1 (Altitude, operating) specification and Table 5 (Idle2).

 

 

 

Rev. E

06/11/2012

Updated Index.

 

 

 

Rev. F

09/05/2012

Added 2.5A spin-up code option (Table 1 and Table 2); page 17.

 

 

 

Rev. G

10/01/2012

Updated Table 1 and Table 2 with rated workload information. Updated DC power

 

 

requirements (Tables 1, 3 and 4).

 

 

 

© 2012 Seagate Technology LLC. All rights reserved. Publication number: 100686584, Rev. G October 2012

Seagate, Seagate Technology and the Wave logo are registered trademarks of Seagate Technology LLC in the United States and/ or other countries. Barracuda and SeaTools are either trademarks or registered trademarks of Seagate Technology LLC or one of its affiliated companies in the United States and/or other countries. All other trademarks or registered trademarks are the property of their respective owners.

No part of this publication may be reproduced in any form without written permission of Seagate Technology LLC. Call 877-PUB-TEK1 (877-782-8351) to request permission.

One gigabyte, or GB, equals one billion bytes and one terabyte, or TB, equals one trillion bytes. Your computer's operating system may use a different standard of measurement and report a lower capacity. In addition, some of the listed capacity is used for formatting and other functions, and thus will not be available for data storage. Seagate reserves the right to change, without notice, product offerings or specifications.

Image 2
Contents Barracuda Document Revision History Revision Date Description of ChangeContents Barracuda Sata Product Manual, Rev. G Figures Barracuda Sata Product Manual, Rev. G Seagate Technology Support Services Barracuda Sata Product Manual, Rev. G Introduction About the Sata interfaceIntroduction Drive Specifications Specification summary tablesDrive Specifications Drive Specification ST500DM002 ST320DM000 ST250DM000 Model Formatted Guaranteed Bytes per sector Capacity Sectors Formatted capacityRecording and interface technology LBA modeDefault logical geometry Physical characteristics Seek timeStart/stop times Power specificationsPower consumption DiskDC power requirements 3-disk 3TB and 2TB models Conducted noise Power-management modesPower modes Heads Spindle Buffer Voltage toleranceHumidity Environmental specifications Ambient temperatureTemperature gradient AltitudeNon-operating vibration AcousticsTest for Prominent Discrete Tones PDTs WarrantyAgency certification Safety certification Electromagnetic immunityKorean RRL Electromagnetic compatibilityFCC verification Australian C-Tick N176Corrosive environment Environmental protectionChina Restriction of Hazardous Substances RoHS Directive Sata cables and connectors Handling and static-discharge precautionsConfiguring the drive Drive mounting Attaching Sata cablingMounting dimensions 1-disk 1TB and 750GB models Mounting dimensions 1-disk 500GB, 320GB and 250GB models Sata Interface Segment Pin Function DefinitionE5H Supported ATA commandsCommand name Command code in hex ECH E7HEAH E3HB0H / DAH C6HE6H E2H0C5AH Identify Device commandWord Description Value AsciiXx07H BE09HBit Word FffehMedia serial number is supported 0BH Set Features command0AH 0CH3 S.M.A.R.T. commands Code in features register A.R.T. commandIndex Barracuda Sata Product Manual, Rev. G Barracuda Sata Product Manual, Rev. G Page Page Seagate Technology LLC Americas